Re: [PATCH v3 09/18] soc: qcom: Add qcom's pstore minidump driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 03/05/23 19:02, Mukesh Ojha wrote:
This driver was inspired from the fact pstore ram region should be
fixed and boot firmware need to have awarness about this region,
so that it will be persistent across boot. But, there are many
QCOM SoC which does not support warm boot from hardware but they
have minidump support from the software, and for them, there is
no need of this pstore ram region to be fixed, but at the same
time have interest in the pstore frontends. So, this driver
get the dynamic reserved region from the ram and register the
ramoops platform device.

  +---------+     +---------+   +--------+     +---------+
  | console |     | pmsg    |   | ftrace |     | dmesg   |
  +---------+     +---------+   +--------+     +---------+
        |             |             |              |
        |             |             |              |
        +------------------------------------------+
                           |
                          \ /
                   +----------------+
             (1)   |pstore frontends|
                   +----------------+
                           |
                          \ /
                  +------------------- +
             (2)  | pstore backend(ram)|
                  +--------------------+
                           |
                          \ /
                  +--------------------+
             (3)  |qcom_pstore_minidump|
                  +--------------------+
                           |
                          \ /
                    +---------------+
             (4)    | qcom_minidump |
                    +---------------+

This driver will route all the pstore front data to the stored
in qcom pstore reserved region and the reason of showing an
arrow from (3) to (4) as qcom_pstore_minidump driver will register
all the available frontends region with qcom minidump driver
in upcoming patch.

Signed-off-by: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
---
  drivers/soc/qcom/Kconfig                |  11 +++
  drivers/soc/qcom/Makefile               |   1 +
  drivers/soc/qcom/qcom_pstore_minidump.c | 116 ++++++++++++++++++++++++++++++++
  3 files changed, 128 insertions(+)
  create mode 100644 drivers/soc/qcom/qcom_pstore_minidump.c

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 15c931e..afdc634 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -293,4 +293,15 @@ config QCOM_MINIDUMP
  	  these selective regions will be dumped instead of the entire DDR.
  	  This saves significant amount of time and/or storage space.
+config QCOM_PSTORE_MINIDUMP
+	tristate "Pstore support for QCOM Minidump"
+	depends on ARCH_QCOM
+	depends on PSTORE_RAM
+	depends on QCOM_MINIDUMP
+	help
+	  Enablement of this driver ensures that ramoops region can be anywhere
+	  reserved in ram instead of being fixed address which needs boot firmware
+	  awareness. So, this driver creates plaform device and registers available
+	  frontend region with the Qualcomm's minidump driver.
+
  endmenu
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 1ebe081..02d30d7 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -34,3 +34,4 @@ obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) +=	kryo-l2-accessors.o
  obj-$(CONFIG_QCOM_ICC_BWMON)	+= icc-bwmon.o
  obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)	+= ice.o
  obj-$(CONFIG_QCOM_MINIDUMP) += qcom_minidump.o
+obj-$(CONFIG_QCOM_PSTORE_MINIDUMP) += qcom_pstore_minidump.o
diff --git a/drivers/soc/qcom/qcom_pstore_minidump.c b/drivers/soc/qcom/qcom_pstore_minidump.c
new file mode 100644
index 0000000..8d58500
--- /dev/null
+++ b/drivers/soc/qcom/qcom_pstore_minidump.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/pstore_ram.h>
+#include <soc/qcom/qcom_minidump.h>
+
+struct qcom_ramoops_config {
+	unsigned long	record_size;
+	unsigned long	console_size;
+	unsigned long	ftrace_size;
+	unsigned long	pmsg_size;
+	unsigned int	mem_type;
+	unsigned int	flags;
+	int		max_reason;
+};
+
+struct qcom_ramoops_dd {
+	struct ramoops_platform_data qcom_ramoops_pdata;
+	struct platform_device *ramoops_pdev;
+};
+
+static struct qcom_ramoops_config default_ramoops_config = {
+	.mem_type = 2,
+	.record_size = 0x0,
+	.console_size = 0x200000,
+	.ftrace_size = 0x0,
+	.pmsg_size = 0x0,
+};

This is effectively hard-cording the configuration of ramoops.

Since the memory range is dynamic and by itself doesn't impose any limitation this should be configurable in the device-tree, like a standard ramoops entry backed by a memory range.

I think this should provide the same interface/knobs as pstore-ram does, unless there's some known limitations to minidump, in which case those should be expressed.

+
+static struct qcom_ramoops_dd *qcom_rdd;
+static int qcom_ramoops_probe(struct platform_device *pdev)
+{
+	struct device_node *of_node = pdev->dev.of_node;
+	struct device_node *node;
+	const struct qcom_ramoops_config *cfg;
+	struct ramoops_platform_data *pdata;
+	struct reserved_mem *rmem;
+	long ret;
+
+	node = of_parse_phandle(of_node, "memory-region", 0);
+	if (!node)
+		return -ENODEV;
+
+	rmem = of_reserved_mem_lookup(node);
+	of_node_put(node);
+	if (!rmem) {
+		dev_err(&pdev->dev, "failed to locate DT /reserved-memory resource\n");
+		return -EINVAL;
+	}
+
+	qcom_rdd = devm_kzalloc(&pdev->dev, sizeof(*qcom_rdd), GFP_KERNEL);
+	if (!qcom_rdd)
+		return -ENOMEM;
+
+	cfg = of_device_get_match_data(&pdev->dev);
+	if (!cfg) {
+		dev_err(&pdev->dev, "failed to get supported matched data\n");
+		return -ENOENT;
+	}
+
+	pdata = &qcom_rdd->qcom_ramoops_pdata;
+	pdata->mem_size = rmem->size;
+	pdata->mem_address = rmem->base;
+	pdata->mem_type = cfg->mem_type;
+	pdata->record_size = cfg->record_size;
+	pdata->console_size = cfg->console_size;
+	pdata->ftrace_size = cfg->ftrace_size;
+	pdata->pmsg_size = cfg->pmsg_size;
+	pdata->max_reason = KMSG_DUMP_PANIC;
+
+	qcom_rdd->ramoops_pdev = platform_device_register_data(NULL, "ramoops", -1,
+							       pdata, sizeof(*pdata));
+	if (IS_ERR(qcom_rdd->ramoops_pdev)) {
+		ret = PTR_ERR(qcom_rdd->ramoops_pdev);
+		dev_err(&pdev->dev, "could not create platform device: %ld\n", ret);
+		qcom_rdd->ramoops_pdev = NULL;
+	}
+
+	return ret;
+}
+
+static int qcom_ramoops_remove(struct platform_device *pdev)
+{
+	platform_device_unregister(qcom_rdd->ramoops_pdev);
+	qcom_rdd->ramoops_pdev = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id qcom_ramoops_of_match[] = {
+	{ .compatible = "qcom,sm8450-ramoops-minidump", .data = &default_ramoops_config },
+	{ .compatible = "qcom,ramoops-minidump", .data = &default_ramoops_config },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, qcom_ramoops_of_match);
+static struct platform_driver qcom_ramoops_drv = {
+	.driver		= {
+		.name	= "qcom,ramoops-minidump",
+		.of_match_table = qcom_ramoops_of_match,
+	},
+	.probe = qcom_ramoops_probe,
+	.remove = qcom_ramoops_remove,
+};
+
+module_platform_driver(qcom_ramoops_drv);
+
+MODULE_DESCRIPTION("Qualcomm minidump pstore driver");
+MODULE_LICENSE("GPL");



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux