From: Suman Anna <s-anna@xxxxxx> Add two new generic API pruss_cfg_read() and pruss_cfg_update() to the PRUSS platform driver to read and program respectively a register within the PRUSS CFG sub-module represented by a syscon driver. These APIs are internal to PRUSS driver. Various useful registers and macros for certain register bit-fields and their values have also been added. Signed-off-by: Suman Anna <s-anna@xxxxxx> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx> Signed-off-by: Puranjay Mohan <p-mohan@xxxxxx> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx> --- drivers/soc/ti/pruss.c | 1 + drivers/soc/ti/pruss.h | 112 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) create mode 100644 drivers/soc/ti/pruss.h diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c index 126b672b9b30..2fa7df667592 100644 --- a/drivers/soc/ti/pruss.c +++ b/drivers/soc/ti/pruss.c @@ -21,6 +21,7 @@ #include <linux/regmap.h> #include <linux/remoteproc.h> #include <linux/slab.h> +#include "pruss.h" /** * struct pruss_private_data - PRUSS driver private data diff --git a/drivers/soc/ti/pruss.h b/drivers/soc/ti/pruss.h new file mode 100644 index 000000000000..4626d5f6b874 --- /dev/null +++ b/drivers/soc/ti/pruss.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PRU-ICSS Subsystem user interfaces + * + * Copyright (C) 2015-2023 Texas Instruments Incorporated - http://www.ti.com + * MD Danish Anwar <danishanwar@xxxxxx> + */ + +#ifndef _SOC_TI_PRUSS_H_ +#define _SOC_TI_PRUSS_H_ + +#include <linux/bits.h> +#include <linux/regmap.h> + +/* + * PRU_ICSS_CFG registers + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only + */ +#define PRUSS_CFG_REVID 0x00 +#define PRUSS_CFG_SYSCFG 0x04 +#define PRUSS_CFG_GPCFG(x) (0x08 + (x) * 4) +#define PRUSS_CFG_CGR 0x10 +#define PRUSS_CFG_ISRP 0x14 +#define PRUSS_CFG_ISP 0x18 +#define PRUSS_CFG_IESP 0x1C +#define PRUSS_CFG_IECP 0x20 +#define PRUSS_CFG_SCRP 0x24 +#define PRUSS_CFG_PMAO 0x28 +#define PRUSS_CFG_MII_RT 0x2C +#define PRUSS_CFG_IEPCLK 0x30 +#define PRUSS_CFG_SPP 0x34 +#define PRUSS_CFG_PIN_MX 0x40 + +/* PRUSS_GPCFG register bits */ +#define PRUSS_GPCFG_PRU_GPO_SH_SEL BIT(25) + +#define PRUSS_GPCFG_PRU_DIV1_SHIFT 20 +#define PRUSS_GPCFG_PRU_DIV1_MASK GENMASK(24, 20) + +#define PRUSS_GPCFG_PRU_DIV0_SHIFT 15 +#define PRUSS_GPCFG_PRU_DIV0_MASK GENMASK(15, 19) + +#define PRUSS_GPCFG_PRU_GPO_MODE BIT(14) +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT 0 +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL BIT(14) + +#define PRUSS_GPCFG_PRU_GPI_SB BIT(13) + +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT 8 +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK GENMASK(12, 8) + +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT 3 +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK GENMASK(7, 3) + +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE 0 +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE BIT(2) +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE BIT(2) + +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK GENMASK(1, 0) +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT 0 + +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT 26 +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK GENMASK(29, 26) + +/* PRUSS_MII_RT register bits */ +#define PRUSS_MII_RT_EVENT_EN BIT(0) + +/* PRUSS_SPP register bits */ +#define PRUSS_SPP_XFER_SHIFT_EN BIT(1) +#define PRUSS_SPP_PRU1_PAD_HP_EN BIT(0) +#define PRUSS_SPP_RTU_XFR_SHIFT_EN BIT(3) + +/** + * pruss_cfg_read() - read a PRUSS CFG sub-module register + * @pruss: the pruss instance handle + * @reg: register offset within the CFG sub-module + * @val: pointer to return the value in + * + * Reads a given register within the PRUSS CFG sub-module and + * returns it through the passed-in @val pointer + * + * Return: 0 on success, or an error code otherwise + */ +static int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val) +{ + if (IS_ERR_OR_NULL(pruss)) + return -EINVAL; + + return regmap_read(pruss->cfg_regmap, reg, val); +} + +/** + * pruss_cfg_update() - configure a PRUSS CFG sub-module register + * @pruss: the pruss instance handle + * @reg: register offset within the CFG sub-module + * @mask: bit mask to use for programming the @val + * @val: value to write + * + * Programs a given register within the PRUSS CFG sub-module + * + * Return: 0 on success, or an error code otherwise + */ +static int pruss_cfg_update(struct pruss *pruss, unsigned int reg, + unsigned int mask, unsigned int val) +{ + if (IS_ERR_OR_NULL(pruss)) + return -EINVAL; + + return regmap_update_bits(pruss->cfg_regmap, reg, mask, val); +} + +#endif /* _SOC_TI_PRUSS_H_ */ -- 2.25.1
