On 09/03/2023 09:33, Krzysztof Kozlowski wrote: > On 07/03/2023 00:11, Melody Olvera wrote: >> This documents the compatible for the component used to boot the > > Do not use "This commit/patch". > https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95 > >> MPSS on the QDU1000 and QRU1000 SoCs. >> >> The QDU1000 and QRU1000 mpss boot process now requires the specification >> of an RMB register space to complete the handshake needed to start or >> attach the mpss. >> >> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx> >> --- >> .../remoteproc/qcom,qdu1000-mpss-pas.yaml | 130 ++++++++++++++++++ >> 1 file changed, 130 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml >> >> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml >> new file mode 100644 >> index 000000000000..9cb4296c1fa6 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qdu1000-mpss-pas.yaml >> @@ -0,0 +1,130 @@ >> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/remoteproc/qcom,qdu1000-mpss-pas.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm QDU1000 Modem Peripheral Authentication Service >> + >> +maintainers: >> + - Melody Olvera <quic_molvera@xxxxxxxxxxx> >> + >> +description: >> + Qualcomm QDU1000 SoC Peripheral Authentication Service loads and boots firmware >> + on the Qualcomm DSP Hexagon core. >> + >> +properties: >> + compatible: >> + enum: >> + - qcom,qdu1000-mpss-pas >> + >> + reg: >> + maxItems: 2 > > You need to list the items instead (just like for clocks). > >> + >> + clocks: >> + items: >> + - description: XO clock >> + >> + clock-names: >> + items: >> + - const: xo >> + >> + qcom,qmp: >> + $ref: /schemas/types.yaml#/definitions/phandle >> + description: Reference to the AOSS side-channel message RAM. >> + >> + smd-edge: false >> + >> + firmware-name: >> + $ref: /schemas/types.yaml#/definitions/string-array > > You can now drop the $ref. > >> + items: >> + - description: Firmware name of the Hexagon core >> + - description: Firmware name of the Hexagon Devicetree >> + >> + memory-region: >> + items: >> + - description: Memory region for main Firmware authentication >> + - description: Memory region for Devicetree Firmware authentication >> + - description: DSM Memory region >> + >> + interrupts: >> + minItems: 6 >> + >> + interrupt-names: >> + minItems: 6 >> + >> + interconnects: >> + minItems: 1 > > maxItems instead Wait, I already commented on this... Some other comments also ignored. This is a friendly reminder during the review process. It seems my previous comments were not fully addressed. Maybe my feedback got lost between the quotes, maybe you just forgot to apply it. Please go back to the previous discussion and either implement all requested changes or keep discussing them. Thank you. Best regards, Krzysztof
