Hi, On Tue, Feb 28, 2023 at 01:02:16PM -0800, Tanmay Shah wrote: > This patch makes each r5 core mailbox client and uses > tx and rx channels to send and receive data to/from > remote processor respectively. This is needed for rpmsg > communication to remote processor. > > Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx> > --- > > Changes in v4: > - move zynqmp_r5_setup_mbox from zynqmp_r5_add_rproc_core to > zynqmp_r5_cluster_init > > Changes in v3: > - fix multi-line comment format > - do not mixup mailbox information with memory-regions > - fix redundant dev_warn for split mode > - setting up mailboxes should return an error code > - redesign driver to move mailbox setup during driver probe > - add .kick function only if mailbox setup is success > > v2: https://lore.kernel.org/all/20230126213154.1707300-1-tanmay.shah@xxxxxxx/ > > drivers/remoteproc/xlnx_r5_remoteproc.c | 227 +++++++++++++++++++++++- > 1 file changed, 225 insertions(+), 2 deletions(-) > > diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c > index 5dd007622603..78c1638ccef0 100644 > --- a/drivers/remoteproc/xlnx_r5_remoteproc.c > +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c > @@ -8,16 +8,23 @@ > #include <linux/dma-mapping.h> > #include <linux/firmware/xlnx-zynqmp.h> > #include <linux/kernel.h> > +#include <linux/mailbox_client.h> > +#include <linux/mailbox/zynqmp-ipi-message.h> > #include <linux/module.h> > #include <linux/of_address.h> > #include <linux/of_platform.h> > #include <linux/of_reserved_mem.h> > #include <linux/platform_device.h> > #include <linux/remoteproc.h> > -#include <linux/slab.h> > > #include "remoteproc_internal.h" > > +/* IPI buffer MAX length */ > +#define IPI_BUF_LEN_MAX 32U > + > +/* RX mailbox client buffer max length */ > +#define MBOX_CLIENT_BUF_MAX (IPI_BUF_LEN_MAX + \ > + sizeof(struct zynqmp_ipi_message)) > /* > * settings for RPU cluster mode which > * reflects possible values of xlnx,cluster-mode dt-property > @@ -43,6 +50,27 @@ struct mem_bank_data { > char *bank_name; > }; > > +/** > + * struct mbox_info > + * > + * @rx_mc_buf: to copy data from mailbox rx channel > + * @tx_mc_buf: to copy data to mailbox tx channel > + * @r5_core: this mailbox's corresponding r5_core pointer > + * @mbox_work: schedule work after receiving data from mailbox > + * @mbox_cl: mailbox client > + * @tx_chan: mailbox tx channel > + * @rx_chan: mailbox rx channel > + */ > +struct mbox_info { > + unsigned char rx_mc_buf[MBOX_CLIENT_BUF_MAX]; > + unsigned char tx_mc_buf[MBOX_CLIENT_BUF_MAX]; > + struct zynqmp_r5_core *r5_core; > + struct work_struct mbox_work; > + struct mbox_client mbox_cl; > + struct mbox_chan *tx_chan; > + struct mbox_chan *rx_chan; > +}; > + > /* > * Hardcoded TCM bank values. This will be removed once TCM bindings are > * accepted for system-dt specifications and upstreamed in linux kernel > @@ -63,6 +91,7 @@ static const struct mem_bank_data zynqmp_tcm_banks[] = { > * @tcm_banks: array of each TCM bank data > * @rproc: rproc handle > * @pm_domain_id: RPU CPU power domain id > + * @ipi: pointer to mailbox information > */ > struct zynqmp_r5_core { > struct device *dev; > @@ -71,6 +100,7 @@ struct zynqmp_r5_core { > struct mem_bank_data **tcm_banks; > struct rproc *rproc; > u32 pm_domain_id; > + struct mbox_info *ipi; > }; > > /** > @@ -88,6 +118,178 @@ struct zynqmp_r5_cluster { > struct zynqmp_r5_core **r5_cores; > }; > > +/** > + * event_notified_idr_cb() - callback for vq_interrupt per notifyid > + * @id: rproc->notify id > + * @ptr: pointer to idr private data > + * @data: data passed to idr_for_each callback > + * > + * Pass notification to remoteproc virtio > + * > + * Return: 0. having return is to satisfy the idr_for_each() function > + * pointer input argument requirement. > + **/ > +static int event_notified_idr_cb(int id, void *ptr, void *data) > +{ > + struct rproc *rproc = data; > + > + if (rproc_vq_interrupt(rproc, id) == IRQ_NONE) > + dev_dbg(&rproc->dev, "data not found for vqid=%d\n", id); > + > + return 0; > +} > + > +/** > + * handle_event_notified() - remoteproc notification work function > + * @work: pointer to the work structure > + * > + * It checks each registered remoteproc notify IDs. > + */ > +static void handle_event_notified(struct work_struct *work) > +{ > + struct mbox_info *ipi; > + struct rproc *rproc; > + > + ipi = container_of(work, struct mbox_info, mbox_work); > + rproc = ipi->r5_core->rproc; > + > + /* > + * We only use IPI for interrupt. The RPU firmware side may or may > + * not write the notifyid when it trigger IPI. > + * And thus, we scan through all the registered notifyids and > + * find which one is valid to get the message. > + * Even if message from firmware is NULL, we attempt to get vqid > + */ > + idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc); > +} > + > +/** > + * zynqmp_r5_mb_rx_cb() - receive channel mailbox callback > + * @cl: mailbox client > + * @msg: message pointer > + * > + * Receive data from ipi buffer, ack interrupt and then > + * it will schedule the R5 notification work. > + */ > +static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *msg) > +{ > + struct zynqmp_ipi_message *ipi_msg, *buf_msg; > + struct mbox_info *ipi; > + size_t len; > + > + ipi = container_of(cl, struct mbox_info, mbox_cl); > + > + /* copy data from ipi buffer to r5_core */ > + ipi_msg = (struct zynqmp_ipi_message *)msg; > + buf_msg = (struct zynqmp_ipi_message *)ipi->rx_mc_buf; > + len = ipi_msg->len; > + if (len > IPI_BUF_LEN_MAX) { > + dev_warn(cl->dev, "msg size exceeded than %d\n", > + IPI_BUF_LEN_MAX); > + len = IPI_BUF_LEN_MAX; > + } > + buf_msg->len = len; > + memcpy(buf_msg->data, ipi_msg->data, len); > + > + /* received and processed interrupt ack */ > + if (mbox_send_message(ipi->rx_chan, NULL) < 0) > + dev_err(cl->dev, "ack failed to mbox rx_chan\n"); > + > + schedule_work(&ipi->mbox_work); > +} > + > +/** > + * zynqmp_r5_setup_mbox() - Setup mailboxes related properties > + * this is used for each individual R5 core > + * > + * @cdev: child node device > + * > + * Function to setup mailboxes related properties > + * return : NULL if failed else pointer to mbox_info > + */ > +static struct mbox_info *zynqmp_r5_setup_mbox(struct device *cdev) > +{ > + struct mbox_client *mbox_cl; > + struct mbox_info *ipi; > + > + ipi = kzalloc(sizeof(*ipi), GFP_KERNEL); > + if (!ipi) > + return NULL; > + > + mbox_cl = &ipi->mbox_cl; > + mbox_cl->rx_callback = zynqmp_r5_mb_rx_cb; > + mbox_cl->tx_block = false; > + mbox_cl->knows_txdone = false; > + mbox_cl->tx_done = NULL; > + mbox_cl->dev = cdev; > + > + /* Request TX and RX channels */ > + ipi->tx_chan = mbox_request_channel_byname(mbox_cl, "tx"); > + if (IS_ERR(ipi->tx_chan)) { > + ipi->tx_chan = NULL; > + kfree(ipi); > + dev_warn(cdev, "mbox tx channel request failed\n"); > + return NULL; > + } > + > + ipi->rx_chan = mbox_request_channel_byname(mbox_cl, "rx"); > + if (IS_ERR(ipi->rx_chan)) { > + mbox_free_channel(ipi->tx_chan); > + ipi->rx_chan = NULL; > + ipi->tx_chan = NULL; > + kfree(ipi); > + dev_warn(cdev, "mbox rx channel request failed\n"); > + return NULL; > + } > + > + INIT_WORK(&ipi->mbox_work, handle_event_notified); > + > + return ipi; > +} > + > +static void zynqmp_r5_free_mbox(struct mbox_info *ipi) > +{ > + if (!ipi) > + return; > + > + if (ipi->tx_chan) { > + mbox_free_channel(ipi->tx_chan); > + ipi->tx_chan = NULL; > + } > + > + if (ipi->rx_chan) { > + mbox_free_channel(ipi->rx_chan); > + ipi->rx_chan = NULL; > + } > + > + kfree(ipi); > +} > + > +/* > + * zynqmp_r5_core_kick() - kick a firmware if mbox is provided > + * @rproc: r5 core's corresponding rproc structure > + * @vqid: virtqueue ID > + */ > +static void zynqmp_r5_rproc_kick(struct rproc *rproc, int vqid) > +{ > + struct zynqmp_r5_core *r5_core = rproc->priv; > + struct device *dev = r5_core->dev; > + struct zynqmp_ipi_message *mb_msg; > + struct mbox_info *ipi; > + int ret; > + > + ipi = r5_core->ipi; > + if (!ipi) > + return; > + > + mb_msg = (struct zynqmp_ipi_message *)ipi->tx_mc_buf; > + memcpy(mb_msg->data, &vqid, sizeof(vqid)); > + mb_msg->len = sizeof(vqid); > + ret = mbox_send_message(ipi->tx_chan, mb_msg); > + if (ret < 0) > + dev_warn(dev, "failed to send message\n"); > +} > + > /* > * zynqmp_r5_set_mode() > * > @@ -614,7 +816,7 @@ static int zynqmp_r5_rproc_unprepare(struct rproc *rproc) > return 0; > } > > -static const struct rproc_ops zynqmp_r5_rproc_ops = { > +static struct rproc_ops zynqmp_r5_rproc_ops = { > .prepare = zynqmp_r5_rproc_prepare, > .unprepare = zynqmp_r5_rproc_unprepare, > .start = zynqmp_r5_rproc_start, > @@ -673,6 +875,7 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) > } > > r5_core->rproc = r5_rproc; > + Spurious change. > return r5_core; > > free_rproc: > @@ -799,6 +1002,7 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) > struct device_node *child; > enum rpu_tcm_comb tcm_mode; > int core_count, ret, i; > + struct mbox_info *ipi; > > ret = of_property_read_u32(dev_node, "xlnx,cluster-mode", &cluster_mode); > > @@ -869,6 +1073,18 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) > > child_devs[i] = &child_pdev->dev; > > + /* > + * If mailbox nodes are disabled using "status" property then > + * setting up mailbox channels will be failed. In that case we > + * don't really need kick() operation. Include .kick() only if > + * mbox channels are acquired successfully. > + */ > + ipi = zynqmp_r5_setup_mbox(&child_pdev->dev); > + if (ipi) > + zynqmp_r5_rproc_ops.kick = zynqmp_r5_rproc_kick; > + else > + zynqmp_r5_rproc_ops.kick = NULL; > + Based on the way this patchset has turned out, I don't think it is required to do this anymore. After all, .kick() won't be called if the mailboxes aren't initialized. Please move the call to zynqmp_r5_setup_mbox() just below in the next hunk. Thanks, Mathieu > /* create and add remoteproc instance of type struct rproc */ > r5_cores[i] = zynqmp_r5_add_rproc_core(&child_pdev->dev); > if (IS_ERR(r5_cores[i])) { > @@ -878,6 +1094,11 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) > goto release_r5_cores; > } > > + if (ipi) { > + r5_cores[i]->ipi = ipi; > + ipi->r5_core = r5_cores[i]; > + } > + > /* > * If two child nodes are available in dts in lockstep mode, > * then ignore second child node. > @@ -915,6 +1136,7 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) > while (i >= 0) { > put_device(child_devs[i]); > if (r5_cores[i]) { > + zynqmp_r5_free_mbox(r5_cores[i]->ipi); > of_reserved_mem_device_release(r5_cores[i]->dev); > rproc_del(r5_cores[i]->rproc); > rproc_free(r5_cores[i]->rproc); > @@ -939,6 +1161,7 @@ static void zynqmp_r5_cluster_exit(void *data) > > for (i = 0; i < cluster->core_count; i++) { > r5_core = cluster->r5_cores[i]; > + zynqmp_r5_free_mbox(r5_core->ipi); > of_reserved_mem_device_release(r5_core->dev); > put_device(r5_core->dev); > rproc_del(r5_core->rproc); > -- > 2.25.1 >