The upstream GLINK driver was first introduced to communicate with the
RPM on MSM8996, presumably as an artifact from that era the command
defines was prefixed RPM_CMD, while they actually are GLINK_CMDs.
Let's rename these, to keep things tidy. No functional change.
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
drivers/rpmsg/qcom_glink_native.c | 98 +++++++++++++++----------------
1 file changed, 49 insertions(+), 49 deletions(-)
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 7a3cac62ecfa..89c3381f06c3 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -183,20 +183,20 @@ struct glink_channel {
static const struct rpmsg_endpoint_ops glink_endpoint_ops;
-#define RPM_CMD_VERSION 0
-#define RPM_CMD_VERSION_ACK 1
-#define RPM_CMD_OPEN 2
-#define RPM_CMD_CLOSE 3
-#define RPM_CMD_OPEN_ACK 4
-#define RPM_CMD_INTENT 5
-#define RPM_CMD_RX_DONE 6
-#define RPM_CMD_RX_INTENT_REQ 7
-#define RPM_CMD_RX_INTENT_REQ_ACK 8
-#define RPM_CMD_TX_DATA 9
-#define RPM_CMD_CLOSE_ACK 11
-#define RPM_CMD_TX_DATA_CONT 12
-#define RPM_CMD_READ_NOTIF 13
-#define RPM_CMD_RX_DONE_W_REUSE 14
+#define GLINK_CMD_VERSION 0
+#define GLINK_CMD_VERSION_ACK 1
+#define GLINK_CMD_OPEN 2
+#define GLINK_CMD_CLOSE 3
+#define GLINK_CMD_OPEN_ACK 4
+#define GLINK_CMD_INTENT 5
+#define GLINK_CMD_RX_DONE 6
+#define GLINK_CMD_RX_INTENT_REQ 7
+#define GLINK_CMD_RX_INTENT_REQ_ACK 8
+#define GLINK_CMD_TX_DATA 9
+#define GLINK_CMD_CLOSE_ACK 11
+#define GLINK_CMD_TX_DATA_CONT 12
+#define GLINK_CMD_READ_NOTIF 13
+#define GLINK_CMD_RX_DONE_W_REUSE 14
#define GLINK_FEATURE_INTENTLESS BIT(1)
@@ -306,7 +306,7 @@ static void qcom_glink_send_read_notify(struct qcom_glink *glink)
{
struct glink_msg msg;
- msg.cmd = cpu_to_le16(RPM_CMD_READ_NOTIF);
+ msg.cmd = cpu_to_le16(GLINK_CMD_READ_NOTIF);
msg.param1 = 0;
msg.param2 = 0;
@@ -375,7 +375,7 @@ static int qcom_glink_send_version(struct qcom_glink *glink)
{
struct glink_msg msg;
- msg.cmd = cpu_to_le16(RPM_CMD_VERSION);
+ msg.cmd = cpu_to_le16(GLINK_CMD_VERSION);
msg.param1 = cpu_to_le16(GLINK_VERSION_1);
msg.param2 = cpu_to_le32(glink->features);
@@ -386,7 +386,7 @@ static void qcom_glink_send_version_ack(struct qcom_glink *glink)
{
struct glink_msg msg;
- msg.cmd = cpu_to_le16(RPM_CMD_VERSION_ACK);
+ msg.cmd = cpu_to_le16(GLINK_CMD_VERSION_ACK);
msg.param1 = cpu_to_le16(GLINK_VERSION_1);
msg.param2 = cpu_to_le32(glink->features);
@@ -398,7 +398,7 @@ static void qcom_glink_send_open_ack(struct qcom_glink *glink,
{
struct glink_msg msg;
- msg.cmd = cpu_to_le16(RPM_CMD_OPEN_ACK);
+ msg.cmd = cpu_to_le16(GLINK_CMD_OPEN_ACK);
msg.param1 = cpu_to_le16(channel->rcid);
msg.param2 = cpu_to_le32(0);
@@ -430,11 +430,11 @@ static void qcom_glink_intent_req_abort(struct glink_channel *channel)
}
/**
- * qcom_glink_send_open_req() - send a RPM_CMD_OPEN request to the remote
+ * qcom_glink_send_open_req() - send a GLINK_CMD_OPEN request to the remote
* @glink: Ptr to the glink edge
* @channel: Ptr to the channel that the open req is sent
*
- * Allocates a local channel id and sends a RPM_CMD_OPEN message to the remote.
+ * Allocates a local channel id and sends a GLINK_CMD_OPEN message to the remote.
* Will return with refcount held, regardless of outcome.
*
* Return: 0 on success, negative errno otherwise.
@@ -463,7 +463,7 @@ static int qcom_glink_send_open_req(struct qcom_glink *glink,
channel->lcid = ret;
- req.msg.cmd = cpu_to_le16(RPM_CMD_OPEN);
+ req.msg.cmd = cpu_to_le16(GLINK_CMD_OPEN);
req.msg.param1 = cpu_to_le16(channel->lcid);
req.msg.param2 = cpu_to_le32(name_len);
strcpy(req.name, channel->name);
@@ -488,7 +488,7 @@ static void qcom_glink_send_close_req(struct qcom_glink *glink,
{
struct glink_msg req;
- req.cmd = cpu_to_le16(RPM_CMD_CLOSE);
+ req.cmd = cpu_to_le16(GLINK_CMD_CLOSE);
req.param1 = cpu_to_le16(channel->lcid);
req.param2 = 0;
@@ -500,7 +500,7 @@ static void qcom_glink_send_close_ack(struct qcom_glink *glink,
{
struct glink_msg req;
- req.cmd = cpu_to_le16(RPM_CMD_CLOSE_ACK);
+ req.cmd = cpu_to_le16(GLINK_CMD_CLOSE_ACK);
req.param1 = cpu_to_le16(rcid);
req.param2 = 0;
@@ -531,7 +531,7 @@ static void qcom_glink_rx_done_work(struct work_struct *work)
iid = intent->id;
reuse = intent->reuse;
- cmd.id = reuse ? RPM_CMD_RX_DONE_W_REUSE : RPM_CMD_RX_DONE;
+ cmd.id = reuse ? GLINK_CMD_RX_DONE_W_REUSE : GLINK_CMD_RX_DONE;
cmd.lcid = cid;
cmd.liid = iid;
@@ -643,7 +643,7 @@ static int qcom_glink_send_intent_req_ack(struct qcom_glink *glink,
{
struct glink_msg msg;
- msg.cmd = cpu_to_le16(RPM_CMD_RX_INTENT_REQ_ACK);
+ msg.cmd = cpu_to_le16(GLINK_CMD_RX_INTENT_REQ_ACK);
msg.param1 = cpu_to_le16(channel->lcid);
msg.param2 = cpu_to_le32(granted);
@@ -674,7 +674,7 @@ static int qcom_glink_advertise_intent(struct qcom_glink *glink,
} __packed;
struct command cmd;
- cmd.id = cpu_to_le16(RPM_CMD_INTENT);
+ cmd.id = cpu_to_le16(GLINK_CMD_INTENT);
cmd.lcid = cpu_to_le16(channel->lcid);
cmd.count = cpu_to_le32(1);
cmd.size = cpu_to_le32(intent->size);
@@ -1037,40 +1037,40 @@ void qcom_glink_native_rx(struct qcom_glink *glink)
param2 = le32_to_cpu(msg.param2);
switch (cmd) {
- case RPM_CMD_VERSION:
- case RPM_CMD_VERSION_ACK:
- case RPM_CMD_CLOSE:
- case RPM_CMD_CLOSE_ACK:
- case RPM_CMD_RX_INTENT_REQ:
+ case GLINK_CMD_VERSION:
+ case GLINK_CMD_VERSION_ACK:
+ case GLINK_CMD_CLOSE:
+ case GLINK_CMD_CLOSE_ACK:
+ case GLINK_CMD_RX_INTENT_REQ:
ret = qcom_glink_rx_defer(glink, 0);
break;
- case RPM_CMD_OPEN_ACK:
+ case GLINK_CMD_OPEN_ACK:
ret = qcom_glink_rx_open_ack(glink, param1);
qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
break;
- case RPM_CMD_OPEN:
+ case GLINK_CMD_OPEN:
ret = qcom_glink_rx_defer(glink, param2);
break;
- case RPM_CMD_TX_DATA:
- case RPM_CMD_TX_DATA_CONT:
+ case GLINK_CMD_TX_DATA:
+ case GLINK_CMD_TX_DATA_CONT:
ret = qcom_glink_rx_data(glink, avail);
break;
- case RPM_CMD_READ_NOTIF:
+ case GLINK_CMD_READ_NOTIF:
qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
qcom_glink_tx_kick(glink);
break;
- case RPM_CMD_INTENT:
+ case GLINK_CMD_INTENT:
qcom_glink_handle_intent(glink, param1, param2, avail);
break;
- case RPM_CMD_RX_DONE:
+ case GLINK_CMD_RX_DONE:
qcom_glink_handle_rx_done(glink, param1, param2, false);
qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
break;
- case RPM_CMD_RX_DONE_W_REUSE:
+ case GLINK_CMD_RX_DONE_W_REUSE:
qcom_glink_handle_rx_done(glink, param1, param2, true);
qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
break;
- case RPM_CMD_RX_INTENT_REQ_ACK:
+ case GLINK_CMD_RX_INTENT_REQ_ACK:
qcom_glink_handle_intent_req_ack(glink, param1, param2);
qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
break;
@@ -1272,7 +1272,7 @@ static int qcom_glink_request_intent(struct qcom_glink *glink,
reinit_completion(&channel->intent_req_comp);
- cmd.id = RPM_CMD_RX_INTENT_REQ;
+ cmd.id = GLINK_CMD_RX_INTENT_REQ;
cmd.cid = channel->lcid;
cmd.size = size;
@@ -1346,7 +1346,7 @@ static int __qcom_glink_send(struct glink_channel *channel,
chunk_size = SZ_8K;
left_size = len - chunk_size;
}
- req.msg.cmd = cpu_to_le16(RPM_CMD_TX_DATA);
+ req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA);
req.msg.param1 = cpu_to_le16(channel->lcid);
req.msg.param2 = cpu_to_le32(iid);
req.chunk_size = cpu_to_le32(chunk_size);
@@ -1367,7 +1367,7 @@ static int __qcom_glink_send(struct glink_channel *channel,
chunk_size = SZ_8K;
left_size -= chunk_size;
- req.msg.cmd = cpu_to_le16(RPM_CMD_TX_DATA_CONT);
+ req.msg.cmd = cpu_to_le16(GLINK_CMD_TX_DATA_CONT);
req.msg.param1 = cpu_to_le16(channel->lcid);
req.msg.param2 = cpu_to_le32(iid);
req.chunk_size = cpu_to_le32(chunk_size);
@@ -1631,22 +1631,22 @@ static void qcom_glink_work(struct work_struct *work)
param2 = le32_to_cpu(msg->param2);
switch (cmd) {
- case RPM_CMD_VERSION:
+ case GLINK_CMD_VERSION:
qcom_glink_receive_version(glink, param1, param2);
break;
- case RPM_CMD_VERSION_ACK:
+ case GLINK_CMD_VERSION_ACK:
qcom_glink_receive_version_ack(glink, param1, param2);
break;
- case RPM_CMD_OPEN:
+ case GLINK_CMD_OPEN:
qcom_glink_rx_open(glink, param1, msg->data);
break;
- case RPM_CMD_CLOSE:
+ case GLINK_CMD_CLOSE:
qcom_glink_rx_close(glink, param1);
break;
- case RPM_CMD_CLOSE_ACK:
+ case GLINK_CMD_CLOSE_ACK:
qcom_glink_rx_close_ack(glink, param1);
break;
- case RPM_CMD_RX_INTENT_REQ:
+ case GLINK_CMD_RX_INTENT_REQ:
qcom_glink_handle_intent_req(glink, param1, param2);
break;
default:
--
2.25.1
