Hi Hari,
On 12/28/2022 6:06 PM, Hari Nagalla wrote:
> Add support to the K3 DSP remoteproc driver to configure the C7xv
> subsystem core on AM62A SoCs. The C7xv susbsytem is based on C71 DSP
> with anlytics engine for deep leraning purposes. The remoteproc
> handling for device management is similar to the C66/C71 DSPs on K3
> J7 family SoCs, even though there are additional hardware accelerators
> and IP updates to C7xv subsystem.
>
> Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
> Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
> ---
Signed-off-by of submitter should be at the last.
I see original author of the patch is Jai here. So you need to amend the
patch such that original author is set to Jai. His Signed-off-by should
be the first and then yours.
> drivers/remoteproc/ti_k3_dsp_remoteproc.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> index eb9c64f7b9b4..ec626a37fef6 100644
> --- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
> @@ -870,6 +870,10 @@ static const struct k3_dsp_mem_data c71_mems[] = {
> { .name = "l1dram", .dev_addr = 0xe00000 },
> };
>
> +static const struct k3_dsp_mem_data c7xv_mems[] = {
> + { .name = "l2sram", .dev_addr = 0x800000 },
> +};
> +
> static const struct k3_dsp_dev_data c66_data = {
> .mems = c66_mems,
> .num_mems = ARRAY_SIZE(c66_mems),
> @@ -884,10 +888,18 @@ static const struct k3_dsp_dev_data c71_data = {
> .uses_lreset = false,
> };
>
> +static const struct k3_dsp_dev_data c7xv_data = {
> + .mems = c7xv_mems,
> + .num_mems = ARRAY_SIZE(c7xv_mems),
> + .boot_align_addr = SZ_2M,
> + .uses_lreset = false,
> +};
> +
> static const struct of_device_id k3_dsp_of_match[] = {
> { .compatible = "ti,j721e-c66-dsp", .data = &c66_data, },
> { .compatible = "ti,j721e-c71-dsp", .data = &c71_data, },
> { .compatible = "ti,j721s2-c71-dsp", .data = &c71_data, },
> + { .compatible = "ti,am62a-c7xv-dsp", .data = &c7xv_data, },
> { /* sentinel */ },
> };
> MODULE_DEVICE_TABLE(of, k3_dsp_of_match);
