Re: [PATCH v1 1/1] drivers: remoteproc: Add bus scaling capability during bootup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gokul,

On 18/10/2022 23:10, Gokul krishna Krishnakumar wrote:
During bootup since remote processors cannot request for
additional bus bandwidth from the interconect framework,
platform driver should provide the proxy resources. Make
a proxy vote for maximizing the bus bandwidth during bootup
for a remote processor and remove it once processor is up.

A similar change has been upstreamed in
- [0] 65b7ebda5028 ("firmware: qcom_scm: Add bw voting support to the SCM interface")
- [1] 8d9be5c6bdcd ("remoteproc: qcom: q6v5: Add interconnect path proxy vote")

The main difference with this patch are:
- [0] only votes for each scm calls, not across multiple calls, is that a problem ?
- [0] & [1] votes (0, UINT_MAX) but you change votes (UINT_MAX, UINT_MAX), does this make a difference ?

[0] https://github.com/torvalds/linux/commit/65b7ebda5028
[1] https://github.com/torvalds/linux/commit/8d9be5c6bdcd


Change-Id: I798b3b000aef4761a7ff8cb6390b7ecd98f925b7
Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@xxxxxxxxxxx>
---
  drivers/remoteproc/qcom_q6v5_pas.c | 106 ++++++++++++++++++++++++++++++++++---
  1 file changed, 100 insertions(+), 6 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 6afd094..b02a1dc 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -21,6 +21,7 @@
  #include <linux/qcom_scm.h>
  #include <linux/regulator/consumer.h>
  #include <linux/remoteproc.h>
+#include <linux/interconnect.h>
  #include <linux/soc/qcom/mdt_loader.h>
  #include <linux/soc/qcom/smem.h>
  #include <linux/soc/qcom/smem_state.h>
@@ -30,8 +31,14 @@
  #include "qcom_q6v5.h"
  #include "remoteproc_internal.h"
+#define PIL_TZ_AVG_BW UINT_MAX
+#define PIL_TZ_PEAK_BW	UINT_MAX
  #define ADSP_DECRYPT_SHUTDOWN_DELAY_MS	100
+static struct icc_path *scm_perf_client;
+static int scm_pas_bw_count;
+static DEFINE_MUTEX(scm_pas_bw_mutex);
+
  struct adsp_data {
  	int crash_reason_smem;
  	const char *firmware_name;
@@ -67,6 +74,7 @@ struct qcom_adsp {
int pas_id;
  	unsigned int minidump_id;
+	struct icc_path *bus_client;
  	int crash_reason_smem;
  	bool has_aggre2_clk;
  	bool decrypt_shutdown;
@@ -136,6 +144,44 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
  	}
  }
+static int scm_pas_enable_bw(void)
+{
+	int ret = 0;
+
+	if (IS_ERR(scm_perf_client))
+		return -EINVAL;
+
+	mutex_lock(&scm_pas_bw_mutex);
+	if (!scm_pas_bw_count) {
+		ret = icc_set_bw(scm_perf_client, PIL_TZ_AVG_BW,
+						PIL_TZ_PEAK_BW);
+		if (ret)
+			goto err_bus;
+	}
+
+	scm_pas_bw_count++;
+	mutex_unlock(&scm_pas_bw_mutex);
+	return ret;
+
+err_bus:
+	pr_err("scm-pas: Bandwidth request failed (%d)\n", ret);
+	icc_set_bw(scm_perf_client, 0, 0);
+
+	mutex_unlock(&scm_pas_bw_mutex);
+	return ret;
+}
+
+static void scm_pas_disable_bw(void)
+{
+	if (IS_ERR(scm_perf_client))
+		return;
+
+	mutex_lock(&scm_pas_bw_mutex);
+	if (scm_pas_bw_count-- == 1)
+		icc_set_bw(scm_perf_client, 0, 0);
+	mutex_unlock(&scm_pas_bw_mutex);
+}
+
  static int adsp_shutdown_poll_decrypt(struct qcom_adsp *adsp)
  {
  	unsigned int retry_num = 50;
@@ -174,15 +220,35 @@ static int adsp_load(struct rproc *rproc, const struct firmware *fw)
  	if (ret)
  		return ret;
+ scm_pas_enable_bw();
  	ret = qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, adsp->pas_id,
  				    adsp->mem_region, adsp->mem_phys, adsp->mem_size,
  				    &adsp->mem_reloc);
  	if (ret)
-		return ret;
+		goto exit;
qcom_pil_info_store(adsp->info_name, adsp->mem_phys, adsp->mem_size);
+exit:
+	scm_pas_disable_bw();
+	return ret;
+}
- return 0;
+static int do_bus_scaling(struct qcom_adsp *adsp, bool enable)
+{
+	int rc = 0;
+	u32 avg_bw = enable ? PIL_TZ_AVG_BW : 0;
+	u32 peak_bw = enable ? PIL_TZ_PEAK_BW : 0;
+
+	if (IS_ERR(adsp->bus_client))
+		dev_err(adsp->dev, "Bus scaling not setup for %s\n",
+			adsp->rproc->name);
+	else
+		rc = icc_set_bw(adsp->bus_client, avg_bw, peak_bw);
+
+	if (rc)
+		dev_err(adsp->dev, "bandwidth request failed(rc:%d)\n", rc);
+
+	return rc;
  }
static int adsp_start(struct rproc *rproc)
@@ -194,10 +260,14 @@ static int adsp_start(struct rproc *rproc)
  	if (ret)
  		return ret;
- ret = adsp_pds_enable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
+	ret = do_bus_scaling(adsp, true);
  	if (ret < 0)
  		goto disable_irqs;
+ ret = adsp_pds_enable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
+	if (ret < 0)
+		goto unscale_bus;
+
  	ret = clk_prepare_enable(adsp->xo);
  	if (ret)
  		goto disable_proxy_pds;
@@ -218,6 +288,8 @@ static int adsp_start(struct rproc *rproc)
  			goto disable_cx_supply;
  	}
+ scm_pas_enable_bw();
+
  	ret = qcom_scm_pas_auth_and_reset(adsp->pas_id);
  	if (ret) {
  		dev_err(adsp->dev,
@@ -234,9 +306,10 @@ static int adsp_start(struct rproc *rproc)
qcom_scm_pas_metadata_release(&adsp->pas_metadata); - return 0;
-
  disable_px_supply:
+	scm_pas_disable_bw();
+	if(!ret)
+		goto exit;
  	if (adsp->px_supply)
  		regulator_disable(adsp->px_supply);
  disable_cx_supply:
@@ -248,9 +321,11 @@ static int adsp_start(struct rproc *rproc)
  	clk_disable_unprepare(adsp->xo);
  disable_proxy_pds:
  	adsp_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
+unscale_bus:
+	do_bus_scaling(adsp, false);
  disable_irqs:
  	qcom_q6v5_unprepare(&adsp->q6v5);
-
+exit:
  	return ret;
  }
@@ -265,6 +340,7 @@ static void qcom_pas_handover(struct qcom_q6v5 *q6v5)
  	clk_disable_unprepare(adsp->aggre2_clk);
  	clk_disable_unprepare(adsp->xo);
  	adsp_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
+	do_bus_scaling(adsp, false);
  }
static int adsp_stop(struct rproc *rproc)
@@ -383,6 +459,22 @@ static int adsp_init_regulator(struct qcom_adsp *adsp)
  	return 0;
  }
+static void adsp_init_bus_scaling(struct qcom_adsp *adsp)
+{
+	if (scm_perf_client)
+		goto get_rproc_client;
+
+	scm_perf_client = of_icc_get(adsp->dev, "crypto_ddr");
+	if (IS_ERR(scm_perf_client))
+		dev_warn(adsp->dev, "Crypto scaling not setup\n");
+
+get_rproc_client:
+	adsp->bus_client = of_icc_get(adsp->dev, "rproc_ddr");
+	if (IS_ERR(adsp->bus_client))
+		dev_warn(adsp->dev, "%s: No bus client\n", __func__);
+
+}
+
  static int adsp_pds_attach(struct device *dev, struct device **devs,
  			   char **pd_names)
  {
@@ -525,6 +617,8 @@ static int adsp_probe(struct platform_device *pdev)
  	if (ret)
  		goto free_rproc;
+ adsp_init_bus_scaling(adsp);
+
  	ret = adsp_pds_attach(&pdev->dev, adsp->proxy_pds,
  			      desc->proxy_pd_names);
  	if (ret < 0)




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux