> Subject: [PATCH] remoteproc: imx_dsp_rproc: Add mutex protection for
> workqueue
>
> The workqueue may execute late even after remoteproc is stopped or
> stopping, some resources (rpmsg device and endpoint) have been released
> in rproc_stop_subdevices(), then rproc_vq_interrupt() access these
> resources will cause kennel dump.
>
> Call trace:
> virtqueue_add_split+0x1ac/0x560
> virtqueue_add_inbuf+0x4c/0x60
> rpmsg_recv_done+0x15c/0x294
> vring_interrupt+0x6c/0xa4
> rproc_vq_interrupt+0x30/0x50
> imx_dsp_rproc_vq_work+0x24/0x40 [imx_dsp_rproc]
> process_one_work+0x1d0/0x354
> worker_thread+0x13c/0x470
> kthread+0x154/0x160
> ret_from_fork+0x10/0x20
>
> Add mutex protection in imx_dsp_rproc_vq_work(), if the state is not
> running, then just skip calling rproc_vq_interrupt().
>
> Also the flush workqueue operation can't be added in rproc stop for same
> reason.
>
> Fixes: ec0e5549f358 ("remoteproc: imx_dsp_rproc: Add remoteproc driver
> for DSP on i.MX")
> Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
Reviewed-by: Peng Fan <peng.fan@xxxxxxx>
I also give a look at other drivers, seems almost all drivers use rproc_vq_interrupt
has same issue, should use mutex to protect the mbox rx callback.
Regards,
Peng.
> ---
> drivers/remoteproc/imx_dsp_rproc.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_dsp_rproc.c
> b/drivers/remoteproc/imx_dsp_rproc.c
> index 899aa8dd12f0..95da1cbefacf 100644
> --- a/drivers/remoteproc/imx_dsp_rproc.c
> +++ b/drivers/remoteproc/imx_dsp_rproc.c
> @@ -347,9 +347,6 @@ static int imx_dsp_rproc_stop(struct rproc *rproc)
> struct device *dev = rproc->dev.parent;
> int ret = 0;
>
> - /* Make sure work is finished */
> - flush_work(&priv->rproc_work);
> -
> if (rproc->state == RPROC_CRASHED) {
> priv->flags &= ~REMOTE_IS_READY;
> return 0;
> @@ -432,9 +429,18 @@ static void imx_dsp_rproc_vq_work(struct
> work_struct *work) {
> struct imx_dsp_rproc *priv = container_of(work, struct
> imx_dsp_rproc,
> rproc_work);
> + struct rproc *rproc = priv->rproc;
> +
> + mutex_lock(&rproc->lock);
> +
> + if (rproc->state != RPROC_RUNNING)
> + goto unlock_mutex;
>
> rproc_vq_interrupt(priv->rproc, 0);
> rproc_vq_interrupt(priv->rproc, 1);
> +
> +unlock_mutex:
> + mutex_unlock(&rproc->lock);
> }
>
> /**
> --
> 2.34.1
