[PATCH v3 6/7] dt-bindings: remoteproc: qcom,msm8916-mss-pil: Add MSM8953

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the compatible for MSS as found on the MSM8953 platform.

The situation is similar to the existing bindings for MSM8974: there is
an additional "mss" power domain that must be voted for while starting
up the remote processor. The difference is that on MSM8974 the power
domain is represented as a regulator (firmware expects specific voltage)
while on MSM8953 it is represented as power domain (firmware expects
performance state instead of voltage).

Handle this difference by adding the "mss" power domain as optional
third item, and then restrict it (and make it required) only when using
the MSM8953 compatible.

Co-developed-by: Sireesh Kodali <sireeshkodali1@xxxxxxxxx>
Signed-off-by: Sireesh Kodali <sireeshkodali1@xxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
---
Changes in v3: Combine series with Sireesh's patches for MSM8953
---
 .../remoteproc/qcom,msm8916-mss-pil.yaml      | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
index 98b19296bde5..3686aabf074a 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
@@ -19,6 +19,7 @@ properties:
       - enum:
           - qcom,msm8909-mss-pil
           - qcom,msm8916-mss-pil
+          - qcom,msm8953-mss-pil
           - qcom,msm8974-mss-pil
 
       - const: qcom,q6v5-pil
@@ -69,11 +70,16 @@ properties:
     items:
       - description: CX proxy power domain (control handed over after startup)
       - description: MX proxy power domain (control handed over after startup)
+      - description: MSS proxy power domain (control handed over after startup)
+                     (only valid for qcom,msm8953-mss-pil)
+    minItems: 2
 
   power-domain-names:
     items:
       - const: cx
       - const: mx
+      - const: mss # only valid for qcom,msm8953-mss-pil
+    minItems: 2
 
   pll-supply:
     description: PLL proxy supply (control handed over after startup)
@@ -186,6 +192,27 @@ required:
   - smd-edge
 
 allOf:
+  # mss power domain is only valid (and required) for MSM8953
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8953-mss-pil
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          minItems: 3
+      required:
+        - power-domains
+        - power-domain-names
+    else:
+      properties:
+        power-domains:
+          maxItems: 2
+        power-domain-names:
+          maxItems: 2
+
   # mss-supply is only valid (and required) for MSM8974
   - if:
       properties:
-- 
2.30.2




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux