The "qcom,msm8974-mss-pil" binding is still similar enough to MSM8916 to be covered by the same DT schema. The only difference is the additional "mss-supply", which can be easily handled using a single if statement. Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx> --- Note: I generated this patch on top of Sibi's series [1] to avoid conflicts later (I expect it will be picked up first). [1]: https://lore.kernel.org/linux-arm-msm/1657020721-24939-1-git-send-email-quic_sibis@xxxxxxxxxxx/ --- .../remoteproc/qcom,msm8916-mss-pil.yaml | 16 ++++++++++++++++ .../devicetree/bindings/remoteproc/qcom,q6v5.txt | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml index 3968348dc982..ca7146551ba9 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml @@ -18,6 +18,7 @@ properties: oneOf: - enum: - qcom,msm8916-mss-pil + - qcom,msm8974-mss-pil - const: qcom,q6v5-pil description: Deprecated, prefer using qcom,msm8916-mss-pil @@ -76,6 +77,9 @@ properties: pll-supply: description: PLL proxy supply (control handed over after startup) + mss-supply: + description: MSS power domain supply (only valid for qcom,msm8974-mss-pil) + resets: items: - description: MSS restart control @@ -177,6 +181,18 @@ required: - qcom,smem-state-names - smd-edge +# mss-supply is only valid (and required) for MSM8974 +if: + properties: + compatible: + const: qcom,msm8974-mss-pil +then: + required: + - mss-supply +else: + properties: + mss-supply: false + # Fallbacks for deprecated properties allOf: - oneOf: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 3beb01da134b..9366ef087209 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -9,7 +9,6 @@ on the Qualcomm Hexagon core. Definition: must be one of: "qcom,ipq8074-wcss-pil" "qcom,qcs404-wcss-pil" - "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" "qcom,msm8998-mss-pil" "qcom,sdm845-mss-pil" @@ -37,7 +36,6 @@ on the Qualcomm Hexagon core. string: qcom,ipq8074-wcss-pil: qcom,qcs404-wcss-pil: - qcom,msm8974-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: @@ -68,8 +66,6 @@ on the Qualcomm Hexagon core. "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc", "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc", "lcc_axim_cbc", "lcc_bcr_sleep" - qcom,msm8974-mss-pil: - must be "iface", "bus", "mem", "xo" qcom,msm8996-mss-pil: must be "iface", "bus", "mem", "xo", "gpll0_mss", "snoc_axi", "mnoc_axi", "pnoc", "qdss" @@ -106,17 +102,6 @@ should be referenced as follows: Definition: reference to the reserved-memory for the mba region followed by the mpss region -For the compatible string below the following supplies are required: - "qcom,msm8974-mss-pil" -- cx-supply: (deprecated, use power domain instead) -- mss-supply: -- mx-supply: (deprecated, use power domain instead) -- pll-supply: - Usage: required - Value type: <phandle> - Definition: reference to the regulators to be held on behalf of the - booting of the Hexagon core - For the compatible string below the following supplies are required: "qcom,qcs404-wcss-pil" - cx-supply: @@ -144,7 +129,6 @@ For the compatible string below the following supplies are required: Definition: The power-domains needed depend on the compatible string: qcom,ipq8074-wcss-pil: no power-domain names required - qcom,msm8974-mss-pil: qcom,msm8996-mss-pil: qcom,msm8998-mss-pil: must be "cx", "mx" -- 2.30.2
