[PATCH v2 3/3] remoteproc: pru: Add support for various PRU cores on K3 AM62x SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The K3 AM62x family of SoC has one PRUSS-M instance and it has two
Programmable Real-Time Units (PRU0 and PRU1). This does not support
Industrial Communications Subsystem features like Ethernet.

Enhance the existing PRU remoteproc driver to support the PRU cores
by using specific compatibles. The initial names for the firmware
images for each PRU core are retrieved from DT nodes, and can be adjusted
through sysfs if required.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 drivers/remoteproc/pru_rproc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 1777a01fa84e..128bf9912f2c 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -897,6 +897,7 @@ static const struct of_device_id pru_rproc_match[] = {
 	{ .compatible = "ti,j721e-pru",		.data = &k3_pru_data },
 	{ .compatible = "ti,j721e-rtu",		.data = &k3_rtu_data },
 	{ .compatible = "ti,j721e-tx-pru",	.data = &k3_tx_pru_data },
+	{ .compatible = "ti,am625-pru",		.data = &k3_pru_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, pru_rproc_match);
-- 
2.17.1




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux