Re: [PATCH v4 3/3] dt-bindings: remoteproc: qcom: Convert SC7180 MSS bindings to YAML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 19, 2022 at 10:17:05PM +0530, Sibi Sankar wrote:
> Convert SC7180 MSS PIL loading bindings to YAML.

I suppose there is a reason the sc7180 is being split out and the only 
one converted, but this doesn't tell me.
> 
> Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/remoteproc/qcom,q6v5.txt   |  20 +-
>  .../bindings/remoteproc/qcom,sc7180-mss-pil.yaml   | 236 +++++++++++++++++++++
>  2 files changed, 238 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> index 1ec9093c3a82..1a691c1435f3 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
> @@ -14,7 +14,6 @@ on the Qualcomm Hexagon core.
>  		    "qcom,msm8974-mss-pil"
>  		    "qcom,msm8996-mss-pil"
>  		    "qcom,msm8998-mss-pil"
> -		    "qcom,sc7180-mss-pil"
>  		    "qcom,sdm845-mss-pil"
>  
>  - reg:
> @@ -46,7 +45,6 @@ on the Qualcomm Hexagon core.
>  		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
>  	qcom,msm8996-mss-pil:
>  	qcom,msm8998-mss-pil:
> -	qcom,sc7180-mss-pil:
>  	qcom,sdm845-mss-pil:
>  		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
>  		    "shutdown-ack"
> @@ -84,9 +82,6 @@ on the Qualcomm Hexagon core.
>  	qcom,msm8998-mss-pil:
>  		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
>  		    "snoc_axi", "mnoc_axi", "qdss"
> -	qcom,sc7180-mss-pil:
> -		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
> -		    "nav"
>  	qcom,sdm845-mss-pil:
>  		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
>  		    "snoc_axi", "mnoc_axi", "prng"
> @@ -98,7 +93,7 @@ on the Qualcomm Hexagon core.
>  		    reference to the list of 3 reset-controllers for the
>  		    wcss sub-system
>  		    reference to the list of 2 reset-controllers for the modem
> -		    sub-system on SC7180, SDM845 SoCs
> +		    sub-system on SDM845 SoCs
>  
>  - reset-names:
>  	Usage: required
> @@ -107,7 +102,7 @@ on the Qualcomm Hexagon core.
>  		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
>  		    for the wcss sub-system
>  		    must be "mss_restart", "pdc_reset" for the modem
> -		    sub-system on SC7180, SDM845 SoCs
> +		    sub-system on SDM845 SoCs
>  
>  For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
>  should be referenced as follows:
> @@ -172,8 +167,6 @@ For the compatible string below the following supplies are required:
>  	qcom,msm8996-mss-pil:
>  	qcom,msm8998-mss-pil:
>  		    must be "cx", "mx"
> -	qcom,sc7180-mss-pil:
> -		    must be "cx", "mx", "mss"
>  	qcom,sdm845-mss-pil:
>  		    must be "cx", "mx", "mss"
>  
> @@ -200,15 +193,6 @@ For the compatible string below the following supplies are required:
>  		    by the three offsets within syscon for q6, modem and nc
>  		    halt registers.
>  
> -For the compatible strings below the following phandle references are required:
> -  "qcom,sc7180-mss-pil"
> -- qcom,spare-regs:
> -	Usage: required
> -	Value type: <prop-encoded-array>
> -	Definition: a phandle reference to a syscon representing TCSR followed
> -		    by the offset within syscon for conn_box_spare0 register
> -		    used by the modem sub-system running on SC7180 SoC.
> -
>  The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
>  on platforms which do not have TrustZone.
>  
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> new file mode 100644
> index 000000000000..b00fdf9e3eeb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> @@ -0,0 +1,236 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7180 MSS Peripheral Image Loader
> +
> +maintainers:
> +  - Sibi Sankar <quic_sibis@xxxxxxxxxxx>
> +
> +description:
> +  This document describes the hardware for a component that loads and boots firmware
> +  on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc7180-mss-pil
> +
> +  reg:
> +    items:
> +      - description: MSS QDSP6 registers
> +      - description: RMB registers
> +
> +  reg-names:
> +    items:
> +      - const: qdsp6
> +      - const: rmb
> +
> +  iommus:
> +    items:
> +      - description: MSA Stream 1
> +      - description: MSA Stream 2
> +
> +  interrupts:
> +    items:
> +      - description: Watchdog interrupt
> +      - description: Fatal interrupt
> +      - description: Ready interrupt
> +      - description: Handover interrupt
> +      - description: Stop acknowledge interrupt
> +      - description: Shutdown acknowledge interrupt
> +
> +  interrupt-names:
> +    items:
> +      - const: wdog
> +      - const: fatal
> +      - const: ready
> +      - const: handover
> +      - const: stop-ack
> +      - const: shutdown-ack
> +
> +  clocks:
> +    items:
> +      - description: GCC MSS IFACE clock
> +      - description: GCC MSS BUS clock
> +      - description: GCC MSS NAV clock
> +      - description: GCC MSS SNOC_AXI clock
> +      - description: GCC MSS MFAB_AXIS clock
> +      - description: RPMH XO clock
> +
> +  clock-names:
> +    items:
> +      - const: iface
> +      - const: bus
> +      - const: nav
> +      - const: snoc_axi
> +      - const: mnoc_axi
> +      - const: xo
> +
> +  power-domains:
> +    items:
> +      - description: CX power domain
> +      - description: MX power domain
> +      - description: MSS power domain
> +
> +  power-domain-names:
> +    items:
> +      - const: cx
> +      - const: mx
> +      - const: mss
> +
> +  resets:
> +    items:
> +      - description: AOSS restart
> +      - description: PDC reset
> +
> +  reset-names:
> +    items:
> +      - const: mss_restart
> +      - const: pdc_reset
> +
> +  memory-region:
> +    maxItems: 2
> +    description: Phandle reference to the reserved-memory for the MBA region followed
> +                 by the modem region.

Use 'items' to describe each entry.

> +
> +  firmware-name:
> +    $ref: /schemas/types.yaml#/definitions/string-array
> +    maxItems: 2
> +    description:
> +      The name of the MBA and modem firmware to be loaded for this remote processor.
> +
> +  qcom,halt-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      three offsets within syscon for q6, modem and nc halt registers.

You need to define this as a schema:

items:
  - items:
      - description: ...
      - description: ...
      - description: ...
      - description: ...

> +
> +  qcom,spare-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      offset within syscon for conn_box_spare0 register.

Same here.

> +
> +  qcom,qmp:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Reference to the AOSS side-channel message RAM.
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array

I believe there's a common schema for this now or one pending so you 
should drop the type here.

> +    description: States used by the AP to signal the Hexagon core
> +    items:
> +      - description: Stop the modem

That's not sufficient for a phandle-array which is really a matrix.

> +
> +  qcom,smem-state-names:
> +    description: The names of the state bits used for SMP2P output
> +    const: stop
> +
> +  glink-edge:
> +    $ref: qcom,glink-edge.yaml#
> +    description:
> +      Qualcomm G-Link subnode which represents communication edge, channels
> +      and devices related to the DSP.
> +
> +    properties:
> +      interrupts:
> +        items:
> +          - description: IRQ from MSS to GLINK
> +
> +      mboxes:
> +        items:
> +          - description: Mailbox for communication between APPS and MSS
> +
> +      label:
> +        items:

Only 1, you can drop 'items'. And 'label' is always 1 entry.

> +          - const: modem
> +
> +      apr: false
> +      fastrpc: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - iommus
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - power-domain-names
> +  - resets
> +  - reset-names
> +  - qcom,halt-regs
> +  - qcom,spare-regs
> +  - memory-region
> +  - qcom,qmp
> +  - qcom,smem-states
> +  - qcom,smem-state-names
> +  - glink-edge
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/power/qcom-rpmpd.h>
> +    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> +    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +
> +    remoteproc_mpss: remoteproc@4080000 {
> +        compatible = "qcom,sc7180-mss-pil";
> +        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
> +        reg-names = "qdsp6", "rmb";
> +
> +        iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
> +
> +        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
> +                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +
> +        interrupt-names = "wdog", "fatal", "ready", "handover",
> +                          "stop-ack", "shutdown-ack";
> +
> +        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> +                 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> +                 <&gcc GCC_MSS_NAV_AXI_CLK>,
> +                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
> +                 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> +                 <&rpmhcc RPMH_CXO_CLK>;
> +        clock-names = "iface", "bus", "nav", "snoc_axi",
> +                      "mnoc_axi", "xo";
> +
> +        power-domains = <&rpmhpd SC7180_CX>,
> +                        <&rpmhpd SC7180_MX>,
> +                        <&rpmhpd SC7180_MSS>;
> +        power-domain-names = "cx", "mx", "mss";
> +
> +        memory-region = <&mba_mem>, <&mpss_mem>;
> +
> +        qcom,qmp = <&aoss_qmp>;
> +
> +        qcom,smem-states = <&modem_smp2p_out 0>;
> +        qcom,smem-state-names = "stop";
> +
> +        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> +                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
> +        reset-names = "mss_restart", "pdc_reset";
> +
> +        qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
> +        qcom,spare-regs = <&tcsr_regs 0xb3e4>;
> +
> +        glink-edge {
> +            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
> +            mboxes = <&apss_shared 12>;
> +            qcom,remote-pid = <1>;
> +            label = "modem";
> +        };
> +    };
> -- 
> 2.7.4
> 
> 



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux