This commit adds the modem (q6v5_mss), WiFi (wcnss-pil) and audio DSP
(q6v5_pas) remote processor nodes for the MSM8953 platform. It also adds
the coresponding SMP2P, SMSM and pinctrl nodes that are needed by these
remote processors.
Signed-off-by: Sireesh Kodali <sireeshkodali1@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 378 ++++++++++++++++++++++++++
1 file changed, 378 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 431228faacdd..04e285e442ff 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -2,9 +2,13 @@
/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
#include <dt-bindings/clock/qcom,gcc-msm8953.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -384,6 +388,80 @@ rpmpd_opp_turbo: opp9 {
};
};
+ modem-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ adsp-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ wcnss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <451>, <431>;
+
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
smsm {
compatible = "qcom,smsm";
@@ -398,6 +476,22 @@ apps_smsm: apps@0 {
#qcom,smem-state-cells = <1>;
};
+
+ hexagon_smsm: hexagon@1 {
+ reg = <1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wcnss_smsm: wcnss@6 {
+ reg = <6>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
soc: soc@0 {
@@ -688,6 +782,59 @@ i2c_8_sleep: i2c-8-sleep-pins {
drive-strength = <2>;
bias-disable;
};
+
+ wcnss_default: wcnss-default-pins {
+ wcss_wlan2 {
+ pins = "gpio76";
+ function = "wcss_wlan2";
+ };
+ wcss_wlan1 {
+ pins = "gpio77";
+ function = "wcss_wlan1";
+ };
+ wcss_wlan0 {
+ pins = "gpio78";
+ function = "wcss_wlan0";
+ };
+ wcss_wlan {
+ pins = "gpio79", "gpio80";
+ function = "wcss_wlan";
+ };
+
+ pinconf {
+ pins = "gpio76", "gpio77", "gpio78",
+ "gpio79", "gpio80";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ wcnss_sleep: wcnss-sleep-pins {
+ wcss_wlan2 {
+ pins = "gpio76";
+ function = "wcss_wlan2";
+ };
+ wcss_wlan1 {
+ pins = "gpio77";
+ function = "wcss_wlan1";
+ };
+ wcss_wlan0 {
+ pins = "gpio78";
+ function = "wcss_wlan0";
+ };
+ wcss_wlan {
+ pins = "gpio79", "gpio80";
+ function = "wcss_wlan";
+ };
+
+ pinconf {
+ pins = "gpio76", "gpio77",
+ "gpio78", "gpio79",
+ "gpio80";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
};
gcc: clock-controller@1800000 {
@@ -745,6 +892,59 @@ spmi_bus: spmi@200f000 {
#size-cells = <0>;
};
+ modem: remoteproc@4080000 {
+ compatible = "qcom,msm8953-mss-pil";
+ reg = <0x4080000 0x100>,
+ <0x4020000 0x040>;
+
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc 0 24 1>,
+ <&modem_smp2p_in 0 0>,
+ <&modem_smp2p_in 1 0>,
+ <&modem_smp2p_in 2 0>,
+ <&modem_smp2p_in 3 0>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ power-domains = <&rpmpd MSM8953_VDDCX>, <&rpmpd MSM8953_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&gcc GCC_MSS_BCR>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+ status = "okay";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,smd-edge = <0>;
+ qcom,ipc = <&apcs 8 12>;
+ qcom,remote-pid = <1>;
+
+ label = "modem";
+ };
+ };
+
usb3: usb@70f8800 {
compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
reg = <0x70f8800 0x400>;
@@ -1057,6 +1257,74 @@ i2c_8: i2c@7af8000 {
status = "disabled";
};
+ pronto: remoteproc@a21b000 {
+ compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+ reg = <0xa204000 0x2000>,
+ <0xa202000 0x1000>,
+ <0xa21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ memory-region = <&wcnss_fw_mem>;
+
+ interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ power-domains = <&rpmpd MSM8953_VDDCX>, <&rpmpd MSM8953_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ qcom,state = <&wcnss_smp2p_out 0>;
+ qcom,state-names = "stop";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&wcnss_default>;
+ pinctrl-1 = <&wcnss_sleep>;
+
+ status = "okay";
+
+ iris: iris {
+ compatible = "qcom,wcn3660b";
+
+ clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+ clock-names = "xo";
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+ qcom,remote-pid = <4>;
+
+ label = "pronto";
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
@@ -1070,6 +1338,116 @@ apcs: mailbox@b011000 {
#mbox-cells = <1>;
};
+ lpass: remoteproc@c200000 {
+ compatible = "qcom,msm8953-adsp-pil";
+ reg = <0xc200000 0x100>;
+
+ interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ power-domains = <&rpmpd MSM8953_VDDCX>;
+ power-domain-names = "cx";
+
+ memory-region = <&adsp_fw_mem>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+ label = "lpass";
+ mboxes = <&apcs 8>;
+ qcom,smd-edge = <1>;
+ qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
+
+ q6afe: q6afe {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ dai@16 {
+ reg = <PRIMARY_MI2S_RX>;
+ qcom,sd-lines = <0 1>;
+ };
+
+ dai@21 {
+ reg = <TERTIARY_MI2S_TX>;
+ qcom,sd-lines = <0 1>;
+ };
+ };
+ q6afecc: clock-controller {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: q6asm {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ dai@0 {
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+
+ dai@1 {
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+
+ dai@2 {
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+
+ dai@3 {
+ reg = <MSM_FRONTEND_DAI_MULTIMEDIA4>;
+ is-compress-dai;
+ };
+ };
+ };
+
+ q6adm: q6adm {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+ };
+
+ };
+
timer@b120000 {
compatible = "arm,armv7-timer-mem";
reg = <0xb120000 0x1000>;
--
2.36.0
