Re: [PATCH v2 1/2] dt-bindings: remoteproc: qcom: Add SC7280 MSS bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 09, 2022 at 07:20:58AM -0500, Rob Herring wrote:
> On Mon, 09 May 2022 13:23:17 +0530, Sibi Sankar wrote:
> > Add MSS PIL loading bindings for SC7280 SoCs.
> > 
> > Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
> > ---
> >  .../bindings/remoteproc/qcom,sc7280-mss-pil.yaml   | 261 +++++++++++++++++++++
> >  1 file changed, 261 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
> > 
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/

The culprit is this snippet in arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi:

/* Modem setup is different on Chrome setups than typical Qualcomm setup */
&remoteproc_mpss {
	status = "okay";
	compatible = "qcom,sc7280-mss-pil";
	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
	memory-region = <&mba_mem>, <&mpss_mem>;
};

The original compatible string from sc7280.dtsi is 'qcom,sc7280-mpss-pas'.

> remoteproc@4080000: clock-names:1: 'snoc_axi' was expected
> 	arch/arm64/boot/dts/qcom/sc7280-crd.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp2.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp.dtb
> 
> remoteproc@4080000: clock-names:2: 'offline' was expected
> 	arch/arm64/boot/dts/qcom/sc7280-crd.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp2.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp.dtb

The fix probably consists in adding overrides for 'clocks' and
'clock-names' to the extension in sc7280-chrome-common.dtsi, unless
we add a dedicated 'qcom,sc7280-mss-pil' node to sc7280.dtsi. This
can be done once the binding landed.

> remoteproc@4080000: 'interconnects' is a required property
> 	arch/arm64/boot/dts/qcom/sc7280-crd.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp2.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp.dtb

This can be fixed by adding an 'interconnects' to either the
extension in sc7280-chrome-common.dtsi, or the original node if
'qcom,sc7280-mpss-pas' uses the same interconnect.

> remoteproc@4080000: reset-names:1: 'pdc_sync' was expected
> 	arch/arm64/boot/dts/qcom/sc7280-crd.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp2.dtb
> 	arch/arm64/boot/dts/qcom/sc7280-idp.dtb
>

This could be fixed by aligning the reset names of the
'qcom,sc7280-mpss-pas' and 'qcom,sc7280-mss-pil' bindings.
The reset is called 'pdc_reset' for 'mpss-pas', and 'pdc_sync'
for 'mpss-pil'.



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux