Re: [PATCH 2/2] remoteproc: imx_dsp_rproc: use common rproc_elf_load_segments

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 24, 2022 at 1:34 AM Peng Fan (OSS) <peng.fan@xxxxxxxxxxx> wrote:
>
> From: Peng Fan <peng.fan@xxxxxxx>
>
> remoteproc elf loader supports the specific case that segments
> have PT_LOAD and memsz/filesz set to zero, so no duplicate
> code.
>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>

I think this change OK, but we have a case with the DSP were
reads/writes should be done in multiples of 32/64.

We need a way to provide our own "memcpy" function to be used by
rproc_elf_load_segments.

> ---
>  drivers/remoteproc/imx_dsp_rproc.c | 95 +-----------------------------
>  1 file changed, 1 insertion(+), 94 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> index 2abee78df96e..eee3c44c2146 100644
> --- a/drivers/remoteproc/imx_dsp_rproc.c
> +++ b/drivers/remoteproc/imx_dsp_rproc.c
> @@ -649,99 +649,6 @@ static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
>         return 0;
>  }
>
> -/**
> - * imx_dsp_rproc_elf_load_segments() - load firmware segments to memory
> - * @rproc: remote processor which will be booted using these fw segments
> - * @fw: the ELF firmware image
> - *
> - * This function specially checks if memsz is zero or not, otherwise it
> - * is mostly same as rproc_elf_load_segments().
> - */
> -static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
> -                                          const struct firmware *fw)
> -{
> -       struct device *dev = &rproc->dev;
> -       u8 class = fw_elf_get_class(fw);
> -       u32 elf_phdr_get_size = elf_size_of_phdr(class);
> -       const u8 *elf_data = fw->data;
> -       const void *ehdr, *phdr;
> -       int i, ret = 0;
> -       u16 phnum;
> -
> -       ehdr = elf_data;
> -       phnum = elf_hdr_get_e_phnum(class, ehdr);
> -       phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
> -
> -       /* go through the available ELF segments */
> -       for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
> -               u64 da = elf_phdr_get_p_paddr(class, phdr);
> -               u64 memsz = elf_phdr_get_p_memsz(class, phdr);
> -               u64 filesz = elf_phdr_get_p_filesz(class, phdr);
> -               u64 offset = elf_phdr_get_p_offset(class, phdr);
> -               u32 type = elf_phdr_get_p_type(class, phdr);
> -               void *ptr;
> -
> -               /*
> -                *  There is a case that with PT_LOAD type, the
> -                *  filesz = memsz = 0. If memsz = 0, rproc_da_to_va
> -                *  should return NULL ptr, then error is returned.
> -                *  So this case should be skipped from the loop.
> -                *  Add !memsz checking here.
> -                */
> -               if (type != PT_LOAD || !memsz)
> -                       continue;
> -
> -               dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
> -                       type, da, memsz, filesz);
> -
> -               if (filesz > memsz) {
> -                       dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
> -                               filesz, memsz);
> -                       ret = -EINVAL;
> -                       break;
> -               }
> -
> -               if (offset + filesz > fw->size) {
> -                       dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
> -                               offset + filesz, fw->size);
> -                       ret = -EINVAL;
> -                       break;
> -               }
> -
> -               if (!rproc_u64_fit_in_size_t(memsz)) {
> -                       dev_err(dev, "size (%llx) does not fit in size_t type\n",
> -                               memsz);
> -                       ret = -EOVERFLOW;
> -                       break;
> -               }
> -
> -               /* grab the kernel address for this device address */
> -               ptr = rproc_da_to_va(rproc, da, memsz, NULL);
> -               if (!ptr) {
> -                       dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
> -                               memsz);
> -                       ret = -EINVAL;
> -                       break;
> -               }
> -
> -               /* put the segment where the remote processor expects it */
> -               if (filesz)
> -                       memcpy(ptr, elf_data + offset, filesz);
> -
> -               /*
> -                * Zero out remaining memory for this segment.
> -                *
> -                * This isn't strictly required since dma_alloc_coherent already
> -                * did this for us. albeit harmless, we may consider removing
> -                * this.
> -                */
> -               if (memsz > filesz)
> -                       memset(ptr + filesz, 0, memsz - filesz);
> -       }
> -
> -       return ret;
> -}
> -
>  /* Prepare function for rproc_ops */
>  static int imx_dsp_rproc_prepare(struct rproc *rproc)
>  {
> @@ -808,7 +715,7 @@ static const struct rproc_ops imx_dsp_rproc_ops = {
>         .start          = imx_dsp_rproc_start,
>         .stop           = imx_dsp_rproc_stop,
>         .kick           = imx_dsp_rproc_kick,
> -       .load           = imx_dsp_rproc_elf_load_segments,
> +       .load           = rproc_elf_load_segments,
>         .parse_fw       = rproc_elf_load_rsc_table,
>         .sanity_check   = rproc_elf_sanity_check,
>         .get_boot_addr  = rproc_elf_get_boot_addr,
> --
> 2.25.1
>



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux