On 1/18/22 20:43, Deepak Kumar Singh wrote:
> Add TICOMGET and TIOCMSET ioctl support for rpmsg char device nodes
> to get/set the low level transport signals.
>
> Signed-off-by: Chris Lew <quic_clew@xxxxxxxxxxx>
> Signed-off-by: Deepak Kumar Singh <quic_deesin@xxxxxxxxxxx>
> ---
> drivers/rpmsg/rpmsg_char.c | 47 ++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 43 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
> index b5907b8..c03a118 100644
> --- a/drivers/rpmsg/rpmsg_char.c
> +++ b/drivers/rpmsg/rpmsg_char.c
> @@ -19,6 +19,7 @@
> #include <linux/rpmsg.h>
> #include <linux/skbuff.h>
> #include <linux/slab.h>
> +#include <linux/termios.h>
> #include <linux/uaccess.h>
> #include <uapi/linux/rpmsg.h>
>
> @@ -74,6 +75,9 @@ struct rpmsg_eptdev {
> spinlock_t queue_lock;
> struct sk_buff_head queue;
> wait_queue_head_t readq;
> +
> + u32 rsigs;
> + bool sig_pending;
> };
>
> static int rpmsg_eptdev_destroy(struct device *dev, void *data)
> @@ -112,7 +116,18 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
> skb_queue_tail(&eptdev->queue, skb);
> spin_unlock(&eptdev->queue_lock);
>
> - /* wake up any blocking processes, waiting for new data */
> + wake_up_interruptible(&eptdev->readq);
> +
> + return 0;
> +}
> +
> +static int rpmsg_sigs_cb(struct rpmsg_device *rpdev, void *priv, u32 sigs)
> +{
> + struct rpmsg_eptdev *eptdev = priv;
> +
> + eptdev->rsigs = sigs;
> + eptdev->sig_pending = true;
> +
> wake_up_interruptible(&eptdev->readq);
Regarding the Glink code, the callback is used to be informed that the remote
is ready to send (DSR) and to receive (CTS or DSR)
So I suppose that the transmission should also be conditioned by the sig_pending
That said tell me if I'm wrong but look to me that what is implemented here is the
hardware flow control already managed by the TTY interface. What about using the
TTY interface in this case?
And What about using the "software flow control" instead? [1]
[1] https://en.wikipedia.org/wiki/Software_flow_control
>
> return 0;
> @@ -137,6 +152,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
> return -EINVAL;
> }
>
> + ept->sig_cb = rpmsg_sigs_cb;
> eptdev->ept = ept;
> filp->private_data = eptdev;
>
> @@ -155,6 +171,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
> eptdev->ept = NULL;
> }
> mutex_unlock(&eptdev->ept_lock);
> + eptdev->sig_pending = false;
>
> /* Discard all SKBs */
> skb_queue_purge(&eptdev->queue);
> @@ -265,6 +282,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
> if (!skb_queue_empty(&eptdev->queue))
> mask |= EPOLLIN | EPOLLRDNORM;
>
> + if (eptdev->sig_pending)
> + mask |= EPOLLPRI;
> +
> mask |= rpmsg_poll(eptdev->ept, filp, wait);
>
> return mask;
> @@ -274,11 +294,30 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
> unsigned long arg)
> {
> struct rpmsg_eptdev *eptdev = fp->private_data;
> + bool set;
> + u32 val;
> + int ret;
>
> - if (cmd != RPMSG_DESTROY_EPT_IOCTL)
> - return -EINVAL;
> + switch (cmd) {
> + case TIOCMGET:
> + eptdev->sig_pending = false;
> + ret = put_user(eptdev->rsigs, (int __user *)arg);
> + break;
> + case TIOCMSET:
> + ret = get_user(val, (int __user *)arg);
> + if (ret)
> + break;
> + set = (val & TIOCM_DTR) ? true : false;
> + ret = rpmsg_set_flow_control(eptdev->ept, set);
> + break;
Could this directly be handled by the driver on open close?
If application wants to suspend the link it could just close de /dev/rpmsgX.
Regards,
Arnaud
> + case RPMSG_DESTROY_EPT_IOCTL:
> + ret = rpmsg_eptdev_destroy(&eptdev->dev, NULL);
> + break;
> + default:
> + ret = -EINVAL;
> + }
>
> - return rpmsg_eptdev_destroy(&eptdev->dev, NULL);
> + return ret;
> }
>
> static const struct file_operations rpmsg_eptdev_fops = {
