In order to make the 'mboxes' property in the TI remoteproc examples
parseable, mailbox provider nodes are needed. Normally, the examples
have a __fixup__ node which can be used for determining each
phandle+arg entry. However, for this binding the arg cells contain a
phandle, and the __fixups__ information can't be used.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
v2: Fix the example rather than changing the schema which was correct
.../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 8 ++++++++
.../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
index 4323cefdf19b..cedbc5efdc56 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -142,6 +142,14 @@ examples:
#address-cells = <2>;
#size-cells = <2>;
+ mailbox0_cluster3: mailbox-0 {
+ #mbox-cells = <1>;
+ };
+
+ mailbox0_cluster4: mailbox-1 {
+ #mbox-cells = <1>;
+ };
+
bus@100000 {
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index 0f2bb06cb7b4..0868154a0364 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -238,6 +238,14 @@ examples:
#address-cells = <2>;
#size-cells = <2>;
+ mailbox0: mailbox-0 {
+ #mbox-cells = <1>;
+ };
+
+ mailbox1: mailbox-1 {
+ #mbox-cells = <1>;
+ };
+
bus@100000 {
compatible = "simple-bus";
#address-cells = <2>;
--
2.32.0
