From: Peng Fan <peng.fan@xxxxxxx> Add i.MX8QXP compatible Add a new property rsrc-id for SoC which supports SCFW. This rsrc-id is used to check whether remote process is under control of Linux or not. To i.MX8QM/QXP, when M4 is in the same hardware partition with Cortex-A cores, need power up M4 through SCFW, then M4 could start. So introduce power-domains property Signed-off-by: Peng Fan <peng.fan@xxxxxxx> --- .../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml index fc16d903353e..ed1bcb3046a9 100644 --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -19,6 +19,7 @@ properties: - fsl,imx8mm-cm4 - fsl,imx8mn-cm7 - fsl,imx8mp-cm7 + - fsl,imx8qxp-cm4 - fsl,imx8ulp-cm33 - fsl,imx7d-cm4 - fsl,imx7ulp-cm4 @@ -59,6 +60,15 @@ properties: Indicate whether need to load the default firmware and start the remote processor automatically. + power-domains: + maxItems: 8 + + rsrc-id: + description: + This property is to specify the resource id of the remote processor in SoC + which supports SCFW + maxItems: 1 + required: - compatible -- 2.25.1