On Sun, 09 Jan 2022 22:06:49 -0600, Hari Nagalla wrote:
> K3 AM64x SoC has a Cortex M4F subsystem in the MCU volatge domain.
> The remote processor's life cycle management and IPC mechanisms are
> similar across the R5F and M4F cores from remote processor driver
> point of view. However, there are subtle differences in image loading
> and starting the M4F subsystems.
>
> The YAML binding document provides the various node properties to be
> configured by the consumers of the M4F subsystem.
>
> Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
> ---
> .../bindings/remoteproc/ti,k3-m4f-rproc.yaml | 121 ++++++++++++++++++
> 1 file changed, 121 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml: properties:memory-region: 'anyOf' conditional failed, one must be fixed:
'minItems' is not one of ['maxItems', 'description', 'deprecated']
hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
'additionalItems' is not one of ['maxItems', 'description', 'deprecated']
hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
'unevaluatedProperties' is not one of ['maxItems', 'description', 'deprecated']
hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
Additional properties are not allowed ('unevaluatedProperties' was unexpected)
hint: Arrays must be described with a combination of minItems/maxItems/items
'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
'additionalItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
'unevaluatedProperties' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
1 was expected
hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
hint: cell array properties must define how many entries and what the entries are when there is more than one entry.
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml: ignoring, error in schema: properties: memory-region
Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.example.dts:19.31-36.11: Warning (unit_address_vs_reg): /example-0/bus@f4000: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.example.dt.yaml:0:0: /example-0/bus@f4000/m4fss@5000000: failed to match any schema with compatible: ['ti,am64-m4fss']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1577759
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
