Re: [PATCH v4] rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 07, 2022 at 03:57:50PM -0800, Bjorn Andersson wrote:
> On Fri 07 Jan 11:44 PST 2022, Matthias Kaehlcke wrote:
> 
> > On Mon, Dec 13, 2021 at 10:32:07AM -0700, Mathieu Poirier wrote:
> > > On Wed, Dec 08, 2021 at 12:52:28PM -0800, Matthias Kaehlcke wrote:
> > > > From: Sujit Kautkar <sujitka@xxxxxxxxxxxx>
> > > > 
> > > > From: Sujit Kautkar <sujitka@xxxxxxxxxxxx>
> > > > 
> > > > struct rpmsg_ctrldev contains a struct cdev. The current code frees
> > > > the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the
> > > > cdev is a managed object, therefore its release is not predictable
> > > > and the rpmsg_ctrldev could be freed before the cdev is entirely
> > > > released, as in the backtrace below.
> > > > 
> > > > [   93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c
> > > > [   93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0
> > > > [   93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v
> > > > [   93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G    B             5.4.163-lockdep #26
> > > > [   93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
> > > > [   93.730055] Workqueue: events kobject_delayed_cleanup
> > > > [   93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO)
> > > > [   93.740216] pc : debug_print_object+0x13c/0x1b0
> > > > [   93.744890] lr : debug_print_object+0x13c/0x1b0
> > > > [   93.749555] sp : ffffffacf5bc7940
> > > > [   93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000
> > > > [   93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000
> > > > [   93.763916] x25: ffffffd0734f856c x24: dfffffd000000000
> > > > [   93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0
> > > > [   93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0
> > > > [   93.780338] x19: ffffffd075199100 x18: 00000000000276e0
> > > > [   93.785814] x17: 0000000000000000 x16: dfffffd000000000
> > > > [   93.791291] x15: ffffffffffffffff x14: 6e6968207473696c
> > > > [   93.796768] x13: 0000000000000000 x12: ffffffd075e2b000
> > > > [   93.802244] x11: 0000000000000001 x10: 0000000000000000
> > > > [   93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900
> > > > [   93.813200] x7 : 0000000000000000 x6 : 0000000000000000
> > > > [   93.818676] x5 : 0000000000000080 x4 : 0000000000000000
> > > > [   93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001
> > > > [   93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061
> > > > [   93.835104] Call trace:
> > > > [   93.837644]  debug_print_object+0x13c/0x1b0
> > > > [   93.841963]  __debug_check_no_obj_freed+0x25c/0x3c0
> > > > [   93.846987]  debug_check_no_obj_freed+0x18/0x20
> > > > [   93.851669]  slab_free_freelist_hook+0xbc/0x1e4
> > > > [   93.856346]  kfree+0xfc/0x2f4
> > > > [   93.859416]  rpmsg_ctrldev_release_device+0x78/0xb8
> > > > [   93.864445]  device_release+0x84/0x168
> > > > [   93.868310]  kobject_cleanup+0x12c/0x298
> > > > [   93.872356]  kobject_delayed_cleanup+0x10/0x18
> > > > [   93.876948]  process_one_work+0x578/0x92c
> > > > [   93.881086]  worker_thread+0x804/0xcf8
> > > > [   93.884963]  kthread+0x2a8/0x314
> > > > [   93.888303]  ret_from_fork+0x10/0x18
> > > > 
> > > > The cdev_device_add/del() API was created to address this issue
> > > > (see commit 233ed09d7fda), use it instead of cdev add/del().
> > > > 
> > > > Signed-off-by: Sujit Kautkar <sujitka@xxxxxxxxxxxx>
> > > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > > > ---
> > > > 
> > > > Changes in v4:
> > > > - call cdev_device_del() from rpmsg_chrdev_remove() instead of
> > > >   rpmsg_ctrldev_release_device()
> > > > - updated subject (was: "rpmsg: glink: Update cdev add/del API in
> > > >   rpmsg_ctrldev_release_device()")
> > > > - updated commit message
> > > > - replaced backtrace in commit message with one that doesn't have
> > > >   a dump_backtrace() call
> > > > 
> > > > Changes in v3:
> > > > - Remove unecessary error check as per Matthias's comment
> > > > 
> > > > Changes in v2:
> > > > - Fix typo in commit message
> > > > 
> > > >  drivers/rpmsg/rpmsg_char.c | 11 ++---------
> > > >  1 file changed, 2 insertions(+), 9 deletions(-)
> > > > 
> > > > diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
> > > > index b5907b80727c..b1b75ef04560 100644
> > > > --- a/drivers/rpmsg/rpmsg_char.c
> > > > +++ b/drivers/rpmsg/rpmsg_char.c
> > > > @@ -459,7 +459,6 @@ static void rpmsg_ctrldev_release_device(struct device *dev)
> > > >  
> > > >  	ida_simple_remove(&rpmsg_ctrl_ida, dev->id);
> > > >  	ida_simple_remove(&rpmsg_minor_ida, MINOR(dev->devt));
> > > > -	cdev_del(&ctrldev->cdev);
> > > >  	kfree(ctrldev);
> > > >  }
> > > >  
> > > > @@ -494,19 +493,13 @@ static int rpmsg_chrdev_probe(struct rpmsg_device *rpdev)
> > > >  	dev->id = ret;
> > > >  	dev_set_name(&ctrldev->dev, "rpmsg_ctrl%d", ret);
> > > >  
> > > > -	ret = cdev_add(&ctrldev->cdev, dev->devt, 1);
> > > > +	ret = cdev_device_add(&ctrldev->cdev, &ctrldev->dev);
> > > >  	if (ret)
> > > >  		goto free_ctrl_ida;
> > > >  
> > > >  	/* We can now rely on the release function for cleanup */
> > > >  	dev->release = rpmsg_ctrldev_release_device;
> > > >  
> > > > -	ret = device_add(dev);
> > > > -	if (ret) {
> > > > -		dev_err(&rpdev->dev, "device_add failed: %d\n", ret);
> > > > -		put_device(dev);
> > > > -	}
> > > > -
> > > >  	dev_set_drvdata(&rpdev->dev, ctrldev);
> > > >  
> > > >  	return ret;
> > > > @@ -532,7 +525,7 @@ static void rpmsg_chrdev_remove(struct rpmsg_device *rpdev)
> > > >  	if (ret)
> > > >  		dev_warn(&rpdev->dev, "failed to nuke endpoints: %d\n", ret);
> > > >  
> > > > -	device_del(&ctrldev->dev);
> > > > +	cdev_device_del(&ctrldev->cdev, &ctrldev->dev);
> > > >  	put_device(&ctrldev->dev);
> > > 
> > > Reviewed-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> > > 
> > > I'll let Bjorn pick this one to make sure it doesn't break anything for current
> > > users of the driver.
> > 
> > Bjorn: can this land or is there any action pending on my side?
> 
> Thanks for the ping Mathieu, this looks good to me, so:
> 
> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> But it should come with:
> 
> Fixes: c0cdc19f84a4 ("rpmsg: Driver for user space endpoint interface")

Thanks, will add!

> But afaict we have the exact same problem in rpmsg_eptdev_create(), is
> there a reason why this isn't updated as well?

Because I didn't notice :)

I'll fix it too, not sure yet if in the same patch or a separate one.



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux