On Mon, Nov 22, 2021 at 06:27:22AM -0600, Hari Nagalla wrote: > Hi All, > > The following series enhances the K3 R5F and DSP remoteproc drivers to > add support for the R5F clusters and C71x DSP on the newer TI K3 J721S2 > SoC family. The J721S2 SoCs have 3 R5FSS clusters, one in MCU voltage > domain and the other two in MAIN voltage domain. There are also 2 C71x > DSP subsystems in MAIN voltage domain. The R5FSS is similar to the R5FSS > in J7200 SoCs, while the C71x DSPs are similar to the C71x DSP on J721e > SoCs. > > See J721S2 Technical Reference Manual (SPRUJ28 – NOVEMBER 2021) > for further details: http://www.ti.com/lit/pdf/spruj28 > > Regards > Hari > > Hari Nagalla (4): > dt-bindings: remoteproc: k3-r5f: Update bindings for J721S2 SoCs > dt-bindings: remoteproc: k3-dsp: Update bindings for J721S2 SoCs > remoteproc: k3-dsp: Extend support for C71x DSPs on J721S2 SoCs > remoteproc: k3-r5: Extend support for R5F clusters on J721S2 SoCs > > .../devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml | 3 +++ > .../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml | 8 +++++--- > drivers/remoteproc/ti_k3_dsp_remoteproc.c | 1 + > drivers/remoteproc/ti_k3_r5_remoteproc.c | 5 +++-- > 4 files changed, 12 insertions(+), 5 deletions(-) I have applied this set. Thanks, Mathieu > > -- > 2.17.1 >
