Re: [PATCH v1 0/3] Initial Renesas R-Car remoteproc support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Good morning,

I have received your patchset but the backlog accumulated over the last little
while as become impressive.  As such I may not be able to provide a review in
a timeframe that usually expected.


Thanks,
Mathieu

On Mon, Nov 15, 2021 at 02:50:29PM +0100, Julien Massot wrote:
> Most of the SoCs in the R-Car gen3 SoC series such as
> H3,M3 and E3 have an 'Arm Realtime Core'.
> This Realtime core is an Arm Cortex-R7 clocked at 800MHz.
> This series adds initial support to load a firmware and start
> this remote processor through the remoteproc subsystem.
> 
> This series depends on
> https://patchwork.kernel.org/project/linux-renesas-soc/patch/20211022122101.66998-1-julien.massot@xxxxxxx/
> to be able to set the Cortex-R7 boot address.
> 
> One of the way to test this driver is to  use the zephyr upstream support
> for h3ulcb board 'blinky' demo is my favorite testing firmware.
> 
> To generate a firmware with the zephyr project.
> 
> follow this starting guide
> https://docs.zephyrproject.org/2.7.0/getting_started/index.html
> 
> Then compile your zephyr demo
> west build -b rcar_h3ulcb_cr7 zephyr/samples/basic/blinky \
>     -DCONFIG_KERNEL_ENTRY=\"_vector_table\" \
>     --build-dir h3-blinky
> 
> Then you can use h3-blinky/zephyr/zephyr.elf as a testing
> firmware.
> 
> Patch 1/3 adds the dt-bindings
> 
> Patch 2/3 adds entries into the dts/dtsi files for r8a77951,
> my testing platform. This driver has also been tested on E3 and M3,
> but lacks proper zephyr support at the moment.
> 
> Modifications to r8a77951-ulcb.dts are given as usage example
> and may be dropped in future patchset since it use some memory
> range that may be reserved for other usage.
> 
> Patch 3/3 is a small driver to cover basic remoteproc
> usage: loading firmware from filesystem, starting and stopping the
> Cortex-r7 processor.
> 
> Julien Massot (3):
>   dt-bindings: remoteproc: Add Renesas R-Car
>   arm64: dts: renesas: r8a77951: Add CR7 realtime processor
>   remoteproc: Add Renesas rcar driver
> 
>  .../remoteproc/renesas,rcar-rproc.yaml        |  66 +++++
>  arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts |  15 ++
>  arch/arm64/boot/dts/renesas/r8a77951.dtsi     |   7 +
>  drivers/remoteproc/Kconfig                    |  12 +
>  drivers/remoteproc/Makefile                   |   1 +
>  drivers/remoteproc/rcar_rproc.c               | 226 ++++++++++++++++++
>  6 files changed, 327 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
>  create mode 100644 drivers/remoteproc/rcar_rproc.c
> 
> -- 
> 2.31.1
> 
> 



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux