Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC EM4 controller for always-on operations, typically used for managing system suspend. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml new file mode 100644 index 000000000000..d892d29a656b --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Amlogic Meson AO ARC Remote Processor bindings + +description: + Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC core + controller for always-on operations, typically used for managing + system suspend. Meson6 and older use a ARC core based on the ARCv1 + ISA, while Meson8, Meson8b and Meson8m2 use an ARC EM4 (ARCv2 ISA) + core. + +maintainers: + - Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> + +properties: + compatible: + items: + - enum: + - amlogic,meson8-ao-arc + - amlogic,meson8b-ao-arc + - const: amlogic,meson-mx-ao-arc + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of the firmware which should be loaded for this remote + processor. + + reg: + description: + Address ranges of the remap and CPU control addresses for the + remote processor. + minItems: 2 + + reg-names: + items: + - const: remap + - const: cpu + + resets: + minItems: 1 + + clocks: + minItems: 1 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandles to a reserved SRAM region which is used as the memory of + the ARC core. The region should be defined as child nodes of the + AHB SRAM node as per the generic bindings in + Documentation/devicetree/bindings/sram/sram.yaml + + amlogic,secbus2: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle to the SECBUS2 region which contains some configuration + bits of this remote processor + +required: + - compatible + - reg + - reg-names + - resets + - clocks + - sram + - amlogic,secbus2 + +additionalProperties: false + +examples: + - | + remoteproc@1c { + compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + reg = <0x1c 0x8>, <0x38 0x8>; + reg-names = "remap", "cpu"; + resets = <&media_cpu_reset>; + clocks = <&media_cpu_clock>; + sram = <&ahb_sram_ao_arc>; + amlogic,secbus2 = <&secbus2>; + }; + +... -- 2.33.0
