From: "Dr. Git" <drgitx@xxxxxxxxx> [Yassine: Change label from modem to mss_pil, change smp2p and reserved mem handles, and change smd-edge label to mpss.] Original patch: https://gitlab.com/msm8996-mainline/linux-msm8996/-/commit/ac73ebff6b74a75d1f3237342c2af8e0dc642353 Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 57 +++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 559612a3ddeb..bb6bfd24256f 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1285,6 +1285,63 @@ lpass_q6_smmu: iommu@1600000 { clock-names = "iface", "bus"; }; + mss_pil: remoteproc@2080000 { + compatible = "qcom,msm8996-mss-pil"; + + reg = <0x02080000 0x100>, + <0x02180000 0x040>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&rpmcc RPM_SMD_PCNOC_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>; + + clock-names = "xo", "iface", "pnoc", "bus", + "mem", "gpll0_mss", "snoc_axi", + "mnoc_axi", "qdss"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + qcom,smem-states = <&mpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <0 449 IRQ_TYPE_EDGE_RISING>; + + label = "mpss"; + mboxes = <&apcs_glb 12>; + qcom,smd-edge = <0>; + qcom,remote-pid = <1>; + }; + }; + stm@3002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x3002000 0x1000>, -- 2.32.0
