[PATCH 0/2] TI K3 R5F remoteproc support on AM46x SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

The following series enhances the K3 R5F remoteproc driver to add support
for the R5F clusters on the newer TI K3 AM64x SoC family. The AM64x SoCs
have 2 R5FSS clusters and no DSPs. Both clusters are capable of supporting
either the conventional Split-mode or a brand new "Single-CPU" mode.

The revised R5FSS IP has the following unique features:
 1. The new Single-CPU mode allows the Core1 TCMs to be combined with
    the Core0 TCMs effectively doubling the amount of TCMs available.
    This is same behavior as LockStep-mode on J7200 SoCs, but all other
    previous SoCs could only use the Core0 TCMs. This combined TCMs appear
    contiguous at the respective Core0 TCM addresses.
 2. TCMs are auto-initialized during module power-up, and the behavior
    is programmable through a SEC_MMR register bit. This is same as on
    J7200 SoCs, and is not present on earlier AM65x and J721E SoCs.

The series is based on 5.12-rc2, and can apply on top of the current
rproc-next branch as well.

regards
Suman

Suman Anna (2):
  dt-bindings: remoteproc: k3-r5f: Update bindings for AM64x SoCs
  remoteproc: k3-r5: Extend support to R5F clusters on AM64x SoCs

 .../bindings/remoteproc/ti,k3-r5f-rproc.yaml  |  31 +++-
 drivers/remoteproc/ti_k3_r5_remoteproc.c      | 155 ++++++++++++++----
 2 files changed, 152 insertions(+), 34 deletions(-)

-- 
2.30.1




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux