Re: [PATCH] dt-bindings: Drop type references on common properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 16 Mar 2021 at 22:49, Rob Herring <robh@xxxxxxxxxx> wrote:
>
> Users of common properties shouldn't have a type definition as the
> common schemas already have one. Drop all the unnecessary type
> references in the tree.
>
> A meta-schema update to catch these is pending.
>
> Cc: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> Cc: Maxime Ripard <mripard@xxxxxxxxxx>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Cc: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
> Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> Cc: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
> Cc: Mark Brown <broonie@xxxxxxxxxx>
> Cc: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
> Cc: Benson Leung <bleung@xxxxxxxxxxxx>
> Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
> Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Stefan Wahren <wahrenst@xxxxxxx>
> Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> Cc: Odelu Kukatla <okukatla@xxxxxxxxxxxxxx>
> Cc: Alex Elder <elder@xxxxxxxxxx>
> Cc: Suman Anna <s-anna@xxxxxx>
> Cc: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> Cc: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Cc: linux-gpio@xxxxxxxxxxxxxxx
> Cc: linux-pm@xxxxxxxxxxxxxxx
> Cc: linux-can@xxxxxxxxxxxxxxx
> Cc: netdev@xxxxxxxxxxxxxxx
> Cc: linux-remoteproc@xxxxxxxxxxxxxxx
> Cc: alsa-devel@xxxxxxxxxxxxxxxx
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml       | 5 +----
>  Documentation/devicetree/bindings/arm/cpus.yaml              | 2 --
>  .../bindings/display/allwinner,sun4i-a10-tcon.yaml           | 1 -
>  .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml    | 3 +--
>  .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml      | 1 -
>  .../devicetree/bindings/interconnect/qcom,rpmh.yaml          | 1 -
>  .../bindings/memory-controllers/nvidia,tegra210-emc.yaml     | 2 +-
>  Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml   | 1 -
>  Documentation/devicetree/bindings/net/qcom,ipa.yaml          | 1 -
>  Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml  | 2 --
>  .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml   | 2 +-
>  Documentation/devicetree/bindings/sound/ak4642.yaml          | 2 --
>  .../devicetree/bindings/sound/google,cros-ec-codec.yaml      | 2 +-
>  Documentation/devicetree/bindings/sound/renesas,rsnd.yaml    | 1 -
>  .../devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml       | 1 -
>  Documentation/devicetree/bindings/usb/usb.yaml               | 1 -
>  16 files changed, 5 insertions(+), 23 deletions(-)

For the qcom-spmi-adc-tm5.yaml:
Acked-by: Dmity Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

>
> diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> index a2c63c8b1d10..c6144c8421fa 100644
> --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> @@ -26,10 +26,7 @@ properties:
>        - const: simple-mfd
>
>    mboxes:
> -    $ref: '/schemas/types.yaml#/definitions/phandle'
> -    description: |
> -      Phandle to the firmware device's Mailbox.
> -      (See: ../mailbox/mailbox.txt for more information)
> +    maxItems: 1
>
>    clocks:
>      type: object
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index 26b886b20b27..6be4a8852ee5 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -256,13 +256,11 @@ properties:
>        where voltage is in V, frequency is in MHz.
>
>    power-domains:
> -    $ref: '/schemas/types.yaml#/definitions/phandle-array'
>      description:
>        List of phandles and PM domain specifiers, as defined by bindings of the
>        PM domain provider (see also ../power_domain.txt).
>
>    power-domain-names:
> -    $ref: '/schemas/types.yaml#/definitions/string-array'
>      description:
>        A list of power domain name strings sorted in the same order as the
>        power-domains property.
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> index c13faf3e6581..3a7d5d731712 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> @@ -73,7 +73,6 @@ properties:
>    clock-output-names:
>      description:
>        Name of the LCD pixel clock created.
> -    $ref: /schemas/types.yaml#/definitions/string-array
>      maxItems: 1
>
>    dmas:
> diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> index 1a54db04f29d..bcafa494ed7a 100644
> --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> @@ -43,8 +43,7 @@ properties:
>
>    gpio-ranges: true
>
> -  gpio-ranges-group-names:
> -    $ref: /schemas/types.yaml#/definitions/string-array
> +  gpio-ranges-group-names: true
>
>    socionext,interrupt-ranges:
>      description: |
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index 6f2398cdc82d..1e7894e524f9 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -102,7 +102,6 @@ patternProperties:
>
>        st,adc-channel-names:
>          description: List of single-ended channel names.
> -        $ref: /schemas/types.yaml#/definitions/string-array
>
>        st,filter-order:
>          description: |
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
> index 799e73cdb90b..13da7b29c707 100644
> --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
> @@ -82,7 +82,6 @@ properties:
>        this interconnect to send RPMh commands.
>
>    qcom,bcm-voter-names:
> -    $ref: /schemas/types.yaml#/definitions/string-array
>      description: |
>        Names for each of the qcom,bcm-voters specified.
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
> index 49ab09252e52..bc8477e7ab19 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
> @@ -34,7 +34,7 @@ properties:
>        - description: EMC general interrupt
>
>    memory-region:
> -    $ref: /schemas/types.yaml#/definitions/phandle
> +    maxItems: 1
>      description:
>        phandle to a reserved memory region describing the table of EMC
>        frequencies trained by the firmware
> diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> index fe6a949a2eab..55bff1586b6f 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> @@ -57,7 +57,6 @@ properties:
>        - const: per
>
>    clock-frequency:
> -    $ref: /schemas/types.yaml#/definitions/uint32
>      description: |
>        The oscillator frequency driving the flexcan device, filled in by the
>        boot loader. This property should only be used the used operating system
> diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> index 8f86084bf12e..4e8dee4aa90d 100644
> --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> @@ -100,7 +100,6 @@ properties:
>        - description: Whether the IPA clock is enabled (if valid)
>
>    qcom,smem-state-names:
> -    $ref: /schemas/types.yaml#/definitions/string-array
>      description: The names of the state bits used for SMP2P output
>      items:
>        - const: ipa-clock-enabled-valid
> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> index d5d7f113bade..828e4a1ece41 100644
> --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> @@ -23,12 +23,10 @@ properties:
>        List of phandle to the nvmem data cells.
>
>    nvmem-names:
> -    $ref: /schemas/types.yaml#/definitions/string-array
>      description:
>        Names for the each nvmem provider.
>
>    nvmem-cell-names:
> -    $ref: /schemas/types.yaml#/definitions/string-array
>      description:
>        Names for each nvmem-cells specified.
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> index 1a1159097a2a..73400bc6e91d 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> @@ -93,7 +93,7 @@ properties:
>  # The following are the optional properties:
>
>    memory-region:
> -    $ref: /schemas/types.yaml#/definitions/phandle
> +    maxItems: 1
>      description: |
>        phandle to the reserved memory node to be associated
>        with the remoteproc device. The reserved memory node
> diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml
> index 6cd213be2266..1e2caa29790e 100644
> --- a/Documentation/devicetree/bindings/sound/ak4642.yaml
> +++ b/Documentation/devicetree/bindings/sound/ak4642.yaml
> @@ -29,11 +29,9 @@ properties:
>
>    clock-frequency:
>      description: common clock binding; frequency of MCKO
> -    $ref: /schemas/types.yaml#/definitions/uint32
>
>    clock-output-names:
>      description: common clock name
> -    $ref: /schemas/types.yaml#/definitions/string
>
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> index acfb9db021dc..77adbebed824 100644
> --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> @@ -32,7 +32,7 @@ properties:
>            The last one integer is the length of the shared memory.
>
>    memory-region:
> -    $ref: '/schemas/types.yaml#/definitions/phandle'
> +    maxItems: 1
>      description: |
>        Shared memory region to EC.  A "shared-dma-pool".
>        See ../reserved-memory/reserved-memory.txt for details.
> diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> index 2e1046513603..e494a0416748 100644
> --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> @@ -78,7 +78,6 @@ properties:
>
>    clock-frequency:
>      description: for audio_clkout0/1/2/3
> -    $ref: /schemas/types.yaml#/definitions/uint32-array
>
>    clkout-lr-asynchronous:
>      description: audio_clkoutn is asynchronizes with lr-clock.
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> index 95a728f4d333..3ea8c0c1f45f 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> @@ -59,7 +59,6 @@ patternProperties:
>
>      properties:
>        reg:
> -        $ref: /schemas/types.yaml#/definitions/uint32
>          description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
>          minimum: 0
>          maximum: 7
> diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml
> index 78491e66ed24..939f217b8c7b 100644
> --- a/Documentation/devicetree/bindings/usb/usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/usb.yaml
> @@ -16,7 +16,6 @@ properties:
>      pattern: "^usb(@.*)?"
>
>    phys:
> -    $ref: /schemas/types.yaml#/definitions/phandle-array
>      description:
>        List of all the USB PHYs on this HCD
>
> --
> 2.27.0
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux