Re: [PATCH v26 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>     > +
>     > +static void zynqmp_r5_cleanup_mbox(struct zynqmp_r5_rproc *z_rproc)
>     > +{
>     > +	mbox_free_channel(z_rproc->tx_chan);
>     > +	mbox_free_channel(z_rproc->rx_chan);
>     > +}
>     > +
>     > +/**
>     > + * zynqmp_r5_probe - Probes ZynqMP R5 processor device node
>     > + *		       this is called for each individual R5 core to
>     > + *		       set up mailbox, Xilinx platform manager unique ID,
>     > + *		       add to rproc core
> 
>     The above has changed since last time, which makes it harder for me to
>     review your work.  From hereon please change only the things I point out so that
>     we keep the same goal posts from one revision to the other.
> 
>     The tabulation needs to be fixed:  
> 
>             * zynqmp_r5_probe - Probes ZynqMP R5 processor device node
>             *
>             * This is called for each individual R5 core to set up mailbox, Xilinx
>             * platform manager unique ID, add to rproc core.
> 
>     The description is also broken.
> 
> [Ben] Ok. How is the following:
> /**                                                                                
>  * zynqmp_r5_probe - Probes ZynqMP R5 processor device node                        
>  *                                                                                 
>  * This is called for each individual R5 core to set up mailbox, Xilinx            
>  * platform manager unique ID, collect SRAM information and wire in                
>  * driver-specific data to to rproc core.                                          
>  *                                                                                 
>  * @pdev: domain platform device for current R5 core                               
>  * @node: pointer of the device node for current R5 core                           
>  * @rpu_mode: mode to configure RPU, split or lockstep                             
>  *                                                                                 
>  * Return: 0 for success, negative value for failure.                              

Much better

>  */                                                                                
> static struct zynqmp_r5_rproc *zynqmp_r5_probe(struct platform_device *pdev,       
>                                                struct device_node *node,           
>                                                enum rpu_oper_mode rpu_mode) 
> 
> 
>     > + *
>     > + * @pdev: domain platform device for current R5 core
>     > + * @node: pointer of the device node for current R5 core
>     > + * @rpu_mode: mode to configure RPU, split or lockstep
>     > + *
>     > + * Return: 0 for success, negative value for failure.
>     > + */
>     > +static struct zynqmp_r5_rproc *zynqmp_r5_probe(struct platform_device *pdev,
>     > +					       struct device_node *node,
>     > +					       enum rpu_oper_mode rpu_mode)
>     > +{
>     > +	int ret, num_banks;
>     > +	struct device *dev = &pdev->dev;
>     > +	struct rproc *rproc_ptr;
>     > +	struct zynqmp_r5_rproc *z_rproc;
>     > +	struct device_node *r5_node;
>     > +
>     > +	/* Allocate remoteproc instance */
>     > +	rproc_ptr = devm_rproc_alloc(dev, dev_name(dev), &zynqmp_r5_rproc_ops,
>     > +				     NULL, sizeof(struct zynqmp_r5_rproc));
>     > +	if (!rproc_ptr) {
>     > +		ret = -ENOMEM;
>     > +		goto error;
>     > +	}
>     > +
>     > +	rproc_ptr->auto_boot = false;
>     > +	z_rproc = rproc_ptr->priv;
>     > +	z_rproc->rproc = rproc_ptr;
>     > +	r5_node = z_rproc->rproc->dev.parent->of_node;
>     > +
>     > +	/* Set up DMA mask */
>     > +	ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>     > +	if (ret)
>     > +		goto error;
>     > +
>     > +	/* Get R5 power domain node */
>     > +	ret = of_property_read_u32(node, "power-domain", &z_rproc->pnode_id);
>     > +	if (ret)
>     > +		goto error;
>     > +
>     > +	ret = r5_set_mode(z_rproc, rpu_mode);
>     > +	if (ret)
>     > +		goto error;
>     > +
>     > +	if (of_property_read_bool(node, "mboxes")) {
>     > +		ret = zynqmp_r5_setup_mbox(z_rproc, node);
>     > +		if (ret)
>     > +			goto error;
>     > +	}
>     > +
>     > +	/* go through TCM banks for r5 node */
>     > +	num_banks = of_count_phandle_with_args(r5_node, BANK_LIST_PROP, NULL);
> 
>     Shouldn't this be @node instead of @r5_node?
> 
> [Ben]  Yes this should and will be node.
> 
>     > +	if (num_banks <= 0) {
>     > +		dev_err(dev, "need to specify TCM banks\n");
>     > +		ret = -EINVAL;
>     > +		goto error;
>     > +	}
>     > +
>     > +	if (num_banks > NUM_SRAMS) {
>     > +		dev_err(dev, "max number of srams is %d. given: %d \r\n",
>     > +			NUM_SRAMS, num_banks);
>     > +		ret = -EINVAL;
>     > +		goto error;
>     > +	}
>     > +
>     > +	/* construct collection of srams used by the current R5 core */
>     > +	for (; num_banks; num_banks--) {
>     > +		struct resource rsc;
>     > +		struct device_node *dt_node;
>     > +		resource_size_t size;
>     > +		int i;
>     > +
>     > +		dt_node = of_parse_phandle(r5_node, BANK_LIST_PROP, i);
>     > +		if (!dt_node) {
>     > +			ret = -EINVAL;
>     > +			goto error;
>     > +		}
>     > +
>     > +		ret = of_address_to_resource(dt_node, 0, &rsc);
>     > +		if (ret < 0) {
>     > +			of_node_put(dt_node);
>     > +			goto error;
>     > +		}
>     > +
>     > +		of_node_put(dt_node);
>     > +		size = resource_size(&rsc);
>     > +
>     > +		/*
>     > +		 * Find corresponding Xilinx platform management ID.
>     > +		 * The bank information is used in prepare/unprepare and
>     > +		 * parse_fw.
>     > +		 */
>     > +		for (i = 0; i < NUM_SRAMS; i++) {
>     > +			if (rsc.start == zynqmp_banks[i].addr) {
>     > +				z_rproc->srams[i].addr = rsc.start;
>     > +				z_rproc->srams[i].size = size;
>     > +				z_rproc->srams[i].id = zynqmp_banks[i].id;
>     > +				break;
>     > +			}
>     > +		}
>     > +
>     > +		if (i == NUM_SRAMS) {
>     > +			dev_err(dev, "sram %llx is not valid.\n", rsc.start);
>     > +			ret = -EINVAL;
>     > +			goto error;
>     > +		}
>     > +	}
> 
>     Everything that is related to the initialisation of srams above should be in a
>     function on its own.  This too is new code that wasn't requested - the next
>     revision needs to include *only* the changes I request.  Any improvement on the
>     current implementation can be made in future patchsets. 
> 
> 
> [Ben] Makes sense. I will do that going forward. For probe() I will put all the sram information collection functionality in 1 function.
> 
>     > +
>     > +	/* Add R5 remoteproc */
>     > +	ret = devm_rproc_add(dev, rproc_ptr);
>     > +	if (ret) {
>     > +		zynqmp_r5_cleanup_mbox(z_rproc);
>     > +		goto error;
>     > +	}
>     > +
>     > +	return z_rproc;
>     > +error:
>     > +	return ERR_PTR(ret);
>     > +}
>     > +
>     > +/*
>     > + * zynqmp_r5_remoteproc_probe
>     > + *
>     > + * @pdev: domain platform device for R5 cluster
>     > + *
>     > + * called when driver is probed, for each R5 core specified in DT,
>     > + * setup as needed to do remoteproc-related operations
>     > + *
>     > + * Return: 0 for success, negative value for failure.
>     > + */
>     > +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
>     > +{
>     > +	int ret, core_count;
>     > +	struct device *dev = &pdev->dev;
>     > +	struct device_node *nc;
>     > +	enum rpu_oper_mode rpu_mode = PM_RPU_MODE_LOCKSTEP;
>     > +	struct list_head *cluster; /* list to track each core's rproc */
>     > +	struct zynqmp_r5_rproc *z_rproc;
>     > +	struct platform_device *child_pdev;
>     > +	struct list_head *pos;
>     > +
>     > +	ret = of_property_read_u32(dev->of_node, "xlnx,cluster-mode", &rpu_mode);
>     > +	if (ret < 0 || (rpu_mode != PM_RPU_MODE_LOCKSTEP &&
>     > +			rpu_mode != PM_RPU_MODE_SPLIT)) {
>     > +		dev_err(dev, "invalid cluster mode: ret %d mode %x\n",
>     > +			ret, rpu_mode);
>     > +		return ret;
>     > +	}
>     > +
>     > +	dev_dbg(dev, "RPU configuration: %s\n",
>     > +		rpu_mode == PM_RPU_MODE_LOCKSTEP ? "lockstep" : "split");
>     > +
>     > +	/*
>     > +	 * if 2 RPUs provided but one is lockstep, then we have an
>     > +	 * invalid configuration.
>     > +	 */
>     > +
>     > +	core_count = of_get_available_child_count(dev->of_node);
>     > +	if ((rpu_mode == PM_RPU_MODE_LOCKSTEP && core_count != 1) ||
>     > +	    core_count > MAX_RPROCS)
>     > +		return -EINVAL;
>     > +
>     > +	cluster = devm_kzalloc(dev, sizeof(*cluster), GFP_KERNEL);
>     > +	if (!cluster)
>     > +		return -ENOMEM;
>     > +	INIT_LIST_HEAD(cluster);
>     > +
>     > +	ret = devm_of_platform_populate(dev);
>     > +	if (ret) {
>     > +		dev_err(dev, "devm_of_platform_populate failed, ret = %d\n", ret);
>     > +		return ret;
>     > +	}
>     > +
>     > +	/* probe each individual r5 core's remoteproc-related info */
>     > +	for_each_available_child_of_node(dev->of_node, nc) {
>     > +		child_pdev = of_find_device_by_node(nc);
> 
>     The device reference needs to be dropped after use, as described in the function
>     documentation.
> 
>     I'm out of time - I will continue tomorrow.
> 
>     Mathieu
> 
> 
> [Ben] By this do you mean that for each platform_device should have a call like
> 	platform_set_drvdata(child_pdev, NULL); if it fails? or something else?

Have another read at the documentation and look at how other people have used
it.  You may already be aware but Bootlin's kernel cross-reference tool is
really good for that.

https://elixir.bootlin.com/linux/v5.12-rc3/source




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux