[PATCH v2 6/6] remoteproc/pru: Add support for various PRU cores on K3 J721E SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Suman Anna <s-anna@xxxxxx>

The K3 J721E family of SoCs have a revised version of the AM65x ICSSG IP
and contains two instances of this newer ICSSG IP. Each ICSSG processor
subsystem contains 2 primary PRU cores, 2 auxiliary PRU cores called RTUs,
and 2 new auxiliary cores called Transmit PRUs (Tx_PRUs).

Enhance the existing PRU remoteproc driver to support these new PRU
and RTU cores by using specific compatibles. The cores have the same
memory copying limitations as on AM65x, so reuses the custom memcpy
function within the driver's ELF loader implementation. The initial
names for the firmware images for each PRU core are retrieved from
DT nodes, and can be adjusted through sysfs if required.

Signed-off-by: Suman Anna <s-anna@xxxxxx>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx>
---
 drivers/remoteproc/pru_rproc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 48c1c51e0d42..96f689283a8b 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -852,6 +852,9 @@ static const struct of_device_id pru_rproc_match[] = {
 	{ .compatible = "ti,am654-pru",		.data = &k3_pru_data },
 	{ .compatible = "ti,am654-rtu",		.data = &k3_rtu_data },
 	{ .compatible = "ti,am654-tx-pru",	.data = &k3_tx_pru_data },
+	{ .compatible = "ti,j721e-pru",		.data = &k3_pru_data },
+	{ .compatible = "ti,j721e-rtu",		.data = &k3_rtu_data },
+	{ .compatible = "ti,j721e-tx-pru",	.data = &k3_tx_pru_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, pru_rproc_match);
-- 
2.29.0




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux