Insert tracepoints in mdt_loader, qcom_scm and remoteproc_core drivers. These tracepoints will be used to analyze the time taken at each step during bootup/shutdown of the remoteproc. Tracepoints in mdt_loader driver provides information about location and size of firmware segments being loaded. Also trace the scm pas calls used to boot/load remote processors. Changelog: v2 -> v1: - Add traces in qcom_scm driver - Add traces in remoteproc core to trace the remoteproc state - Trace the physical address where segment is loaded in mdt_loader Rishabh Bhatnagar (3): soc: qcom: Add tracepoints to mdt loader firmware: scm: Add tracepoints to scm driver for pas calls remoteproc: Add ftrace events to trace lifecycle of remoteprocs drivers/firmware/qcom_scm.c | 9 ++++ drivers/remoteproc/remoteproc_core.c | 19 +++++++- drivers/soc/qcom/mdt_loader.c | 7 +++ include/trace/events/mdt_loader.h | 38 +++++++++++++++ include/trace/events/qcom_scm.h | 34 ++++++++++++++ include/trace/events/remoteproc.h | 91 ++++++++++++++++++++++++++++++++++++ 6 files changed, 197 insertions(+), 1 deletion(-) create mode 100644 include/trace/events/mdt_loader.h create mode 100644 include/trace/events/qcom_scm.h create mode 100644 include/trace/events/remoteproc.h -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
