On Thu, Oct 15, 2020 at 10:33:25AM +0200, Arnaud POULIQUEN wrote:
> Hi Mathieu,
>
> On 10/14/20 1:25 AM, Mathieu Poirier wrote:
> > Move structures rpmsg_hdr and rpmsg_ns_msg to their own header file
> > so that they can be used by other entities.
> >
> > Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> > ---
> > drivers/rpmsg/virtio_rpmsg_bus.c | 58 ++----------------------------
> > include/linux/rpmsg_ns.h | 62 ++++++++++++++++++++++++++++++++
> > include/uapi/linux/rpmsg.h | 3 ++
> > 3 files changed, 67 insertions(+), 56 deletions(-)
> > create mode 100644 include/linux/rpmsg_ns.h
> >
> > diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> > index 793fe924671f..85f2acc4ed9f 100644
> > --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> > +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> > @@ -19,7 +19,7 @@
> > #include <linux/mutex.h>
> > #include <linux/of_device.h>
> > #include <linux/rpmsg.h>
> > -#include <linux/rpmsg_byteorder.h>
> > +#include <linux/rpmsg_ns.h>
> > #include <linux/scatterlist.h>
> > #include <linux/slab.h>
> > #include <linux/sched.h>
> > @@ -27,6 +27,7 @@
> > #include <linux/virtio_ids.h>
> > #include <linux/virtio_config.h>
> > #include <linux/wait.h>
> > +#include <uapi/linux/rpmsg.h>
> >
> > #include "rpmsg_internal.h"
> >
> > @@ -70,58 +71,6 @@ struct virtproc_info {
> > struct rpmsg_endpoint *ns_ept;
> > };
> >
> > -/* The feature bitmap for virtio rpmsg */
> > -#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
> > -
> > -/**
> > - * struct rpmsg_hdr - common header for all rpmsg messages
> > - * @src: source address
> > - * @dst: destination address
> > - * @reserved: reserved for future use
> > - * @len: length of payload (in bytes)
> > - * @flags: message flags
> > - * @data: @len bytes of message payload data
> > - *
> > - * Every message sent(/received) on the rpmsg bus begins with this header.
> > - */
> > -struct rpmsg_hdr {
> > - __rpmsg32 src;
> > - __rpmsg32 dst;
> > - __rpmsg32 reserved;
> > - __rpmsg16 len;
> > - __rpmsg16 flags;
> > - u8 data[];
> > -} __packed;
> > -
> > -/**
> > - * struct rpmsg_ns_msg - dynamic name service announcement message
> > - * @name: name of remote service that is published
> > - * @addr: address of remote service that is published
> > - * @flags: indicates whether service is created or destroyed
> > - *
> > - * This message is sent across to publish a new service, or announce
> > - * about its removal. When we receive these messages, an appropriate
> > - * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
> > - * or ->remove() handler of the appropriate rpmsg driver will be invoked
> > - * (if/as-soon-as one is registered).
> > - */
> > -struct rpmsg_ns_msg {
> > - char name[RPMSG_NAME_SIZE];
> > - __rpmsg32 addr;
> > - __rpmsg32 flags;
> > -} __packed;
> > -
> > -/**
> > - * enum rpmsg_ns_flags - dynamic name service announcement flags
> > - *
> > - * @RPMSG_NS_CREATE: a new remote service was just created
> > - * @RPMSG_NS_DESTROY: a known remote service was just destroyed
> > - */
> > -enum rpmsg_ns_flags {
> > - RPMSG_NS_CREATE = 0,
> > - RPMSG_NS_DESTROY = 1,
> > -};
> > -
> > /**
> > * @vrp: the remote processor this channel belongs to
> > */
> > @@ -162,9 +111,6 @@ struct virtio_rpmsg_channel {
> > */
> > #define RPMSG_RESERVED_ADDRESSES (1024)
> >
> > -/* Address 53 is reserved for advertising remote services */
> > -#define RPMSG_NS_ADDR (53)
> > -
> > static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
> > static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
> > static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len,
> > diff --git a/include/linux/rpmsg_ns.h b/include/linux/rpmsg_ns.h
> > new file mode 100644
> > index 000000000000..3d836b8580b2
> > --- /dev/null
> > +++ b/include/linux/rpmsg_ns.h
> > @@ -0,0 +1,62 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +
> > +#ifndef _LINUX_RPMSG_NS_H
> > +#define _LINUX_RPMSG_NS_H
> > +
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/types.h>
> > +#include <linux/rpmsg_byteorder.h>
> > +
> > +/**
> > + * struct rpmsg_hdr - common header for all rpmsg messages
> > + * @src: source address
> > + * @dst: destination address
> > + * @reserved: reserved for future use
> > + * @len: length of payload (in bytes)
> > + * @flags: message flags
> > + * @data: @len bytes of message payload data
> > + *
> > + * Every message sent(/received) on the rpmsg bus begins with this header.
> > + */
> > +struct rpmsg_hdr {
> > + __rpmsg32 src;
> > + __rpmsg32 dst;
> > + __rpmsg32 reserved;
> > + __rpmsg16 len;
> > + __rpmsg16 flags;
> > + u8 data[];
> > +} __packed;
>
> This structure is not related to the rpmsg ns service but to the rpmsg bus.
> If this structure has to be exposed to rpmsg client should be in rpmsg.h, but
> Is there a need to expose it for now?
> I suppose that it is for vhost...As the need will depends on the implementation,
> I would suggest leaving it internally and expose only if needed, in the
> related series.
>
I also thought about moving rpmsg_hdr to rpmsg.h but decided against because in
most cases using the name space service usually means that a message header will
be required. I also thought it would be easier to use, i.e include one header
rather than two. That too is a little thin because anyone using a name service
will also need to get access to rpmsg_device, which is in rpmsg.h.
I'm definitely not strongly opinionated on where it should go, or I can leave it
in virtio_rpmsg_bus.c too...
> > +
> > +/**
> > + * struct rpmsg_ns_msg - dynamic name service announcement message
> > + * @name: name of remote service that is published
> > + * @addr: address of remote service that is published
> > + * @flags: indicates whether service is created or destroyed
> > + *
> > + * This message is sent across to publish a new service, or announce
> > + * about its removal. When we receive these messages, an appropriate
> > + * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
> > + * or ->remove() handler of the appropriate rpmsg driver will be invoked
> > + * (if/as-soon-as one is registered).
> > + */
> > +struct rpmsg_ns_msg {
> > + char name[RPMSG_NAME_SIZE];
> > + __rpmsg32 addr;
> > + __rpmsg32 flags;
> > +} __packed;
> > +
> > +/**
> > + * enum rpmsg_ns_flags - dynamic name service announcement flags
> > + *
> > + * @RPMSG_NS_CREATE: a new remote service was just created
> > + * @RPMSG_NS_DESTROY: a known remote service was just destroyed
> > + */
> > +enum rpmsg_ns_flags {
> > + RPMSG_NS_CREATE = 0,
> > + RPMSG_NS_DESTROY = 1,
> > +};
> > +
> > +/* Address 53 is reserved for advertising remote services */
> > +#define RPMSG_NS_ADDR (53)
>
> What about my proposal [1] to put this in rpmsg.h, to create a list of
> reserved Address
That too is a grey area... Moving RPMSG_NS_ADDR to rpmsg.h means we have a name
service #define in rpmsg.h. I think that one should stay in rpmsg_ns.h.
>
> [1] https://lkml.org/lkml/2020/7/31/442
>
> > +
> > +#endif
> > diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
> > index e14c6dab4223..d669c04ef289 100644
> > --- a/include/uapi/linux/rpmsg.h
> > +++ b/include/uapi/linux/rpmsg.h
> > @@ -24,4 +24,7 @@ struct rpmsg_endpoint_info {
> > #define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
> > #define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2)
> >
> > +/* The feature bitmap for virtio rpmsg */
> > +#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
> > +
>
> Same suggestion here,i would drop this from this series
Will do.
Thanks for the feedback,
Mathieu
>
> Thanks,
> Arnaud
>
> > #endif
> >
