Hi Bjorn, The following is v5 of the TI K3 R5F remoteproc driver series supporting all the R5F processor clusters/subsystems on TI AM65x and J721E SoCs. Please see the v1 cover-letter [1] for the features supported on these R5F processors. This series has only 1 line change w.r.t v4 version [4], the example in dt-bindings is updated to fix couple of dt_binding_check warnings when applied against the latest linux-next version due to a base TI binding conversion to YAML. Rob has left it to your discretion w.r.t the bindings, so appreciate it if you can review the binding and pick up the series for 5.10. regards Suman [1] R5F v1: https://patchwork.kernel.org/cover/11456367/ [2] R5F v2: https://patchwork.kernel.org/cover/11632993/ [3] R5F v3: https://patchwork.kernel.org/cover/11679327/ [4] R5F v4: https://patchwork.kernel.org/cover/11763783/ Suman Anna (4): dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add loading support for on-chip SRAM regions .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 281 ++++ drivers/remoteproc/Kconfig | 13 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/ti_k3_r5_remoteproc.c | 1395 +++++++++++++++++ 4 files changed, 1690 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml create mode 100644 drivers/remoteproc/ti_k3_r5_remoteproc.c -- 2.28.0
