Hello Arnaud,
On 8/27/20 9:21 AM, Arnaud Pouliquen wrote:
> Two backup registers are used to store the Cortex-M4 state and the resource
> table address.
> Declare the tamp node and add associated properties in m4_rproc node
> to allow Linux to attach to a firmware loaded by the first boot stages.
>
> Associated driver implementation is available in commit 9276536f455b3
> ("remoteproc: stm32: Parse syscon that will manage M4 synchronisation").
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
> ---
> arch/arm/boot/dts/stm32mp151.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index bfe29023fbd5..842ecffae73a 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1541,6 +1541,11 @@
> status = "disabled";
> };
>
> + tamp: tamp@5c00a000 {
> + compatible = "st,stm32-tamp", "syscon";
> + reg = <0x5c00a000 0x400>;
> + };
> +
Just saw this now. I have a pending patch adding this node as well:
https://lore.kernel.org/patchwork/patch/1306971/
For my use case, I need a "simple-mfd" compatible to allow child
nodes to be probed.
Could you CC me when you send out your v2, so I can rebase?
(Or if you don't mind, just add the "simple-mfd" into the compatible
list yourself :-)
Cheers
Ahmad
> /*
> * Break node order to solve dependency probe issue between
> * pinctrl and exti.
> @@ -1717,6 +1722,8 @@
> st,syscfg-holdboot = <&rcc 0x10C 0x1>;
> st,syscfg-tz = <&rcc 0x000 0x1>;
> st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
> + st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
> + st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
> status = "disabled";
> };
> };
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
