Re: [PATCH 6/6] dma-mapping: introduce DMA range map, supplanting dma_pfn_offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 15, 2020 at 07:41:22AM +0200, Christoph Hellwig wrote:
> On Mon, Sep 14, 2020 at 05:01:47PM -0600, Mathieu Poirier wrote:
> 
> [700 lines of the fullquote deleted..]
> 
> > > +	for (r = map; r->size; r++)
> > > +		num_ranges++;
> > > +
> > > +	new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)),
> > > +			  GFP_KERNEL);
> > > +	if (!new_map)
> > > +		return -ENOMEM;
> > > +	to->dma_range_map = new_map;
> > > +	return 0;
> > > +}
> > > +
> > 
> > This patch seemed Ok to me but it broke the stm32 remoteproc implementation.  When
> > I tested things out function dma_coerce_mask_and_cohenrent() returns -5 and the
> > rest of the initialisation fails.  I isolated things to function dma_to_pfn()
> > [2].  In the original implementation __bus_to_pfn() returns 0xfffff and
> > dev->dma_pfn_offset is equal to 0x38000.  As such the function returns 0x137fff
> > and dma_supported() a non-zero value[3].
> > 
> > With this set function dma_to_pfn() received a face lift.  Function
> > __bus_to_pfn() still returns 0xfffff but translate_dma_to_phys() returns 0,
> > which forces dma_supported() to also return 0 and that is where the -5 (-EIO)
> > comes from.
> > 
> > Taking a futher look at translate_dma_to_phy(), @dma_addr never falls within the
> > bus_dma_region ranges and returns 0.
> > 
> > I'm suspecting an initialisation problem and if it occurred here, it will
> > likely show up elsewhere.
> 
> Can you try this incremental patch?
> 
> diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h
> index 088c97181ab146..c6b21acba7a459 100644
> --- a/include/linux/dma-direct.h
> +++ b/include/linux/dma-direct.h
> @@ -46,7 +46,7 @@ static inline phys_addr_t translate_dma_to_phys(struct device *dev,
>  		if (dma_addr >= m->dma_start && dma_addr - m->dma_start < m->size)
>  			return (phys_addr_t)dma_addr + m->offset;
>  
> -	return 0;
> +	return (phys_addr_t)-1;

That did the trick - the stm32 platform driver's probe() function completes and
the remote processor is operatinal. 

That being said the value returned by function dma_to_pfn()
is 0x137fff in the original code and 0xfffff with your patches applied.

Thanks,
Mathieu

>  }
>  
>  #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux