virtio_rpmsg_bus.c keeps RPMsg protocol structure declarations and
common defines like the ones, needed for name-space announcements,
internal. Move them to common headers instead.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@xxxxxxxxxxxxxxx>
Reviewed-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
---
drivers/rpmsg/virtio_rpmsg_bus.c | 78 +-----------------------------
include/linux/rpmsg/virtio.h | 83 ++++++++++++++++++++++++++++++++
include/uapi/linux/rpmsg.h | 3 ++
3 files changed, 88 insertions(+), 76 deletions(-)
create mode 100644 include/linux/rpmsg/virtio.h
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 9006fc7f73d0..f39c426f9c5e 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -19,6 +19,7 @@
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/rpmsg.h>
+#include <linux/rpmsg/virtio.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/sched.h>
@@ -27,6 +28,7 @@
#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
#include <linux/wait.h>
+#include <uapi/linux/rpmsg.h>
#include "rpmsg_internal.h"
@@ -70,58 +72,6 @@ struct virtproc_info {
struct rpmsg_endpoint *ns_ept;
};
-/* The feature bitmap for virtio rpmsg */
-#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
-
-/**
- * struct rpmsg_hdr - common header for all rpmsg messages
- * @src: source address
- * @dst: destination address
- * @reserved: reserved for future use
- * @len: length of payload (in bytes)
- * @flags: message flags
- * @data: @len bytes of message payload data
- *
- * Every message sent(/received) on the rpmsg bus begins with this header.
- */
-struct rpmsg_hdr {
- __virtio32 src;
- __virtio32 dst;
- __virtio32 reserved;
- __virtio16 len;
- __virtio16 flags;
- u8 data[];
-} __packed;
-
-/**
- * struct rpmsg_ns_msg - dynamic name service announcement message
- * @name: name of remote service that is published
- * @addr: address of remote service that is published
- * @flags: indicates whether service is created or destroyed
- *
- * This message is sent across to publish a new service, or announce
- * about its removal. When we receive these messages, an appropriate
- * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
- * or ->remove() handler of the appropriate rpmsg driver will be invoked
- * (if/as-soon-as one is registered).
- */
-struct rpmsg_ns_msg {
- char name[RPMSG_NAME_SIZE];
- __virtio32 addr;
- __virtio32 flags;
-} __packed;
-
-/**
- * enum rpmsg_ns_flags - dynamic name service announcement flags
- *
- * @RPMSG_NS_CREATE: a new remote service was just created
- * @RPMSG_NS_DESTROY: a known remote service was just destroyed
- */
-enum rpmsg_ns_flags {
- RPMSG_NS_CREATE = 0,
- RPMSG_NS_DESTROY = 1,
-};
-
/**
* @vrp: the remote processor this channel belongs to
*/
@@ -134,27 +84,6 @@ struct virtio_rpmsg_channel {
#define to_virtio_rpmsg_channel(_rpdev) \
container_of(_rpdev, struct virtio_rpmsg_channel, rpdev)
-/*
- * We're allocating buffers of 512 bytes each for communications. The
- * number of buffers will be computed from the number of buffers supported
- * by the vring, upto a maximum of 512 buffers (256 in each direction).
- *
- * Each buffer will have 16 bytes for the msg header and 496 bytes for
- * the payload.
- *
- * This will utilize a maximum total space of 256KB for the buffers.
- *
- * We might also want to add support for user-provided buffers in time.
- * This will allow bigger buffer size flexibility, and can also be used
- * to achieve zero-copy messaging.
- *
- * Note that these numbers are purely a decision of this driver - we
- * can change this without changing anything in the firmware of the remote
- * processor.
- */
-#define MAX_RPMSG_NUM_BUFS (512)
-#define MAX_RPMSG_BUF_SIZE (512)
-
/*
* Local addresses are dynamically allocated on-demand.
* We do not dynamically assign addresses from the low 1024 range,
@@ -162,9 +91,6 @@ struct virtio_rpmsg_channel {
*/
#define RPMSG_RESERVED_ADDRESSES (1024)
-/* Address 53 is reserved for advertising remote services */
-#define RPMSG_NS_ADDR (53)
-
static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len,
diff --git a/include/linux/rpmsg/virtio.h b/include/linux/rpmsg/virtio.h
new file mode 100644
index 000000000000..3ede1a4a68a3
--- /dev/null
+++ b/include/linux/rpmsg/virtio.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _LINUX_RPMSG_VIRTIO_H
+#define _LINUX_RPMSG_VIRTIO_H
+
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/virtio_types.h>
+
+/**
+ * struct rpmsg_hdr - common header for all rpmsg messages
+ * @src: source address
+ * @dst: destination address
+ * @reserved: reserved for future use
+ * @len: length of payload (in bytes)
+ * @flags: message flags
+ * @data: @len bytes of message payload data
+ *
+ * Every message sent(/received) on the rpmsg bus begins with this header.
+ */
+struct rpmsg_hdr {
+ __virtio32 src;
+ __virtio32 dst;
+ __virtio32 reserved;
+ __virtio16 len;
+ __virtio16 flags;
+ u8 data[];
+} __packed;
+
+/**
+ * struct rpmsg_ns_msg - dynamic name service announcement message
+ * @name: name of remote service that is published
+ * @addr: address of remote service that is published
+ * @flags: indicates whether service is created or destroyed
+ *
+ * This message is sent across to publish a new service, or announce
+ * about its removal. When we receive these messages, an appropriate
+ * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
+ * or ->remove() handler of the appropriate rpmsg driver will be invoked
+ * (if/as-soon-as one is registered).
+ */
+struct rpmsg_ns_msg {
+ char name[RPMSG_NAME_SIZE];
+ __virtio32 addr;
+ __virtio32 flags;
+} __packed;
+
+/**
+ * enum rpmsg_ns_flags - dynamic name service announcement flags
+ *
+ * @RPMSG_NS_CREATE: a new remote service was just created
+ * @RPMSG_NS_DESTROY: a known remote service was just destroyed
+ */
+enum rpmsg_ns_flags {
+ RPMSG_NS_CREATE = 0,
+ RPMSG_NS_DESTROY = 1,
+};
+
+/*
+ * We're allocating buffers of 512 bytes each for communications. The
+ * number of buffers will be computed from the number of buffers supported
+ * by the vring, upto a maximum of 512 buffers (256 in each direction).
+ *
+ * Each buffer will have 16 bytes for the msg header and 496 bytes for
+ * the payload.
+ *
+ * This will utilize a maximum total space of 256KB for the buffers.
+ *
+ * We might also want to add support for user-provided buffers in time.
+ * This will allow bigger buffer size flexibility, and can also be used
+ * to achieve zero-copy messaging.
+ *
+ * Note that these numbers are purely a decision of this driver - we
+ * can change this without changing anything in the firmware of the remote
+ * processor.
+ */
+#define MAX_RPMSG_NUM_BUFS 512
+#define MAX_RPMSG_BUF_SIZE 512
+
+/* Address 53 is reserved for advertising remote services */
+#define RPMSG_NS_ADDR 53
+
+#endif
diff --git a/include/uapi/linux/rpmsg.h b/include/uapi/linux/rpmsg.h
index e14c6dab4223..d669c04ef289 100644
--- a/include/uapi/linux/rpmsg.h
+++ b/include/uapi/linux/rpmsg.h
@@ -24,4 +24,7 @@ struct rpmsg_endpoint_info {
#define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
#define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2)
+/* The feature bitmap for virtio rpmsg */
+#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
+
#endif
--
2.28.0
