Hi Peng,
On Fri, Jul 24, 2020 at 04:08:07PM +0800, Peng Fan wrote:
> Make syscon optional, since i.MX8QM/QXP/7ULP not have SRC to control M4.
> But currently i.MX8QM/QXP/7ULP not added, so still check regmap
> when start/stop to avoid unhappy things.
On the i.MX8QM/QXP/7ULP processors, the remote processors are not handled by the
remoteproc cores, as implemented in this patch. In such a scenario how does the
remoteproc core know the remote processor has crashed and how does it recover
from such a condition?
Thanks,
Mathieu
>
> Reviewed-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
> drivers/remoteproc/imx_rproc.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 82594a800a1b..4fad5c0b1c05 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -162,6 +162,9 @@ static int imx_rproc_start(struct rproc *rproc)
> struct device *dev = priv->dev;
> int ret;
>
> + if (!priv->regmap)
> + return -EOPNOTSUPP;
> +
> ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> dcfg->src_mask, dcfg->src_start);
> if (ret)
> @@ -177,6 +180,9 @@ static int imx_rproc_stop(struct rproc *rproc)
> struct device *dev = priv->dev;
> int ret;
>
> + if (!priv->regmap)
> + return -EOPNOTSUPP;
> +
> ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> dcfg->src_mask, dcfg->src_stop);
> if (ret)
> @@ -325,9 +331,10 @@ static int imx_rproc_probe(struct platform_device *pdev)
> regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
> if (IS_ERR(regmap)) {
> dev_err(dev, "failed to find syscon\n");
> - return PTR_ERR(regmap);
> + regmap = NULL;
> + } else {
> + regmap_attach_dev(dev, regmap, &config);
> }
> - regmap_attach_dev(dev, regmap, &config);
>
> /* set some other name then imx */
> rproc = rproc_alloc(dev, "imx-rproc", &imx_rproc_ops,
> --
> 2.16.4
>
