On Wed 22 Jul 13:10 PDT 2020, Sibi Sankar wrote:
> The following mem abort is observed when the mba firmware size exceeds
> the allocated mba region. MBA firmware size is restricted to a maximum
> size of 1M and remaining memory region is used by modem debug policy
> firmware when available. Hence verify whether the MBA firmware size lies
> within the allocated memory region and is not greater than 1M before
> loading.
>
> Err Logs:
> Unable to handle kernel paging request at virtual address
> Mem abort info:
> ...
> Call trace:
> __memcpy+0x110/0x180
> rproc_start+0x40/0x218
> rproc_boot+0x5b4/0x608
> state_store+0x54/0xf8
> dev_attr_store+0x44/0x60
> sysfs_kf_write+0x58/0x80
> kernfs_fop_write+0x140/0x230
> vfs_write+0xc4/0x208
> ksys_write+0x74/0xf8
> __arm64_sys_write+0x24/0x30
> ...
>
> Fixes: 051fb70fd4ea4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
> Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> ---
> drivers/remoteproc/qcom_q6v5_mss.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 718acebae777f..4e72c9e30426c 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -412,6 +412,12 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
> {
> struct q6v5 *qproc = rproc->priv;
>
> + /* MBA is restricted to a maximum size of 1M */
> + if (fw->size > qproc->mba_size || fw->size > SZ_1M) {
> + dev_err(qproc->dev, "MBA firmware load failed\n");
I'll change this to "MBA firmware exceeds size limit\n". Please let me
know if you object.
Regards,
Bjorn
> + return -EINVAL;
> + }
> +
> memcpy(qproc->mba_region, fw->data, fw->size);
>
> return 0;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
