Hi All, The following is v2 of the TI K3 R5F remoteproc driver series supporting all the R5F processor clusters/subsystems on TI AM65x and J721E SoCs. Please see the v1 cover-letter [1] for the features supported on these R5F processors. The patches are based off 5.8-rc1 and now sit on top of the v3 K3 DSP C66x and C71x remoteproc driver series [2][3] (v1 had R5F followed by DSPs). The v2 version now only has 4 patches instead of the 7 patches in v1. The first 2 patches from v1 are already part of 5.8-rc1 and the third patch is moved to the K3 DSP C66x series [4]. The following is the summary of the main changes in v2: - Reworked bindings patch (patch #1) to leverage a new common ti-sci-proc yaml bindings file introduced in the K3 DSP C66x series. - K3 R5F remoteproc driver revised to leverage more devm_ API and address all Mathieu's comments. Please see the individual patches for detailed delta differences. regards Suman [1] R5F v1: https://patchwork.kernel.org/cover/11456367/ [2] C66x v3: https://patchwork.kernel.org/cover/11602331/ [3] C71x v3: https://patchwork.kernel.org/cover/11602345/ [4] https://patchwork.kernel.org/patch/11602329/ Suman Anna (4): dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCs remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem remoteproc: k3-r5: Initialize TCM memories for ECC remoteproc: k3-r5: Add loading support for on-chip SRAM regions .../bindings/remoteproc/ti,k3-r5f-rproc.yaml | 278 ++++ drivers/remoteproc/Kconfig | 13 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/ti_k3_r5_remoteproc.c | 1396 +++++++++++++++++ 4 files changed, 1688 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml create mode 100644 drivers/remoteproc/ti_k3_r5_remoteproc.c -- 2.26.0
