Re: [PATCH v3 03/14] remoteproc: Add new operation and flags for synchronistation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 20 May 15:06 PDT 2020, Mathieu Poirier wrote:

> On Mon, May 18, 2020 at 05:55:00PM -0700, Bjorn Andersson wrote:
> > On Fri 15 May 12:24 PDT 2020, Mathieu Poirier wrote:
> > 
> > > Good day Bjorn,
> > > 
> > > On Wed, May 13, 2020 at 06:32:24PM -0700, Bjorn Andersson wrote:
> > > > On Fri 08 May 14:01 PDT 2020, Mathieu Poirier wrote:
> > > > 
> > > > > On Tue, May 05, 2020 at 05:22:53PM -0700, Bjorn Andersson wrote:
> > > > > > On Fri 24 Apr 13:01 PDT 2020, Mathieu Poirier wrote:
[..]
> > > > > > > +	bool after_crash;
> > > > > > 
> > > > > > Similarly what is the expected steps to be taken by the core when this
> > > > > > is true? Should rproc_report_crash() simply stop/start the subdevices
> > > > > > and upon one of the ops somehow tell the remote controller that it can
> > > > > > proceed with the recovery?
> > > > > 
> > > > > The exact same sequence of steps will be carried out as they are today, except
> > > > > that if after_crash == true, the remoteproc core won't be switching the remote
> > > > > processor on, exactly as it would do when on_init == true.
> > > > > 
> > > > 
> > > > Just to make sure we're on the same page:
> > > > 
> > > > after_crash = false is what we have today, and would mean:
> > > > 
> > > > 1) stop subdevices
> > > > 2) power off
> > > > 3) unprepare subdevices
> > > > 4) generate coredump
> > > > 5) request firmware
> > > > 6) load segments
> > > > 7) find resource table
> > > > 8) prepare subdevices
> > > > 9) "boot"
> > > > 10) start subdevices
> > > 
> > > Exactly
> > > 
> > > > 
> > > > after_crash = true would mean:
> > > > 
> > > > 1) stop subdevices
> > > > 2) "detach"
> > > > 3) unprepare subdevices
> > > > 4) prepare subdevices
> > > > 5) "attach"
> > > > 6) start subdevices
> > > >
> > > 
> > > Yes
> > >  
> > > > State diagram wise both of these would represent the transition RUNNING
> > > > -> CRASHED -> RUNNING, but somehow the platform driver needs to be able
> > > > to specify which of these sequences to perform. Per your naming
> > > > suggestion above, this does sound like a "autonomous_recovery" boolean
> > > > to me.
> > > 
> > > Right, semantically "rproc->autonomous" would apply quite well.
> > > 
> > > In function rproc_crash_handler_work(), a call to rproc_set_sync_flag() has been
> > > strategically placed to set the value of rproc->autonomous based on
> > > "after_crash".  From there the core knows which rproc_ops to use.  Here too we
> > > have to rely on the rproc_ops provided by the platform to do the right thing
> > > based on the scenario to enact.
> > > 
> > 
> > Do you think that autonomous_recovery would be something that changes
> > for a given remoteproc instance? I envisioned it as something that you
> > know at registration time, but perhaps I'm missing some details here.
> 
> I don't envision any of the transision flags to change once they are set by the
> platform.   The same applies to the new rproc_ops, it can be set only once.
> Otherwise combination of possible scenarios becomes too hard to manage, leading
> to situations where the core and MCU get out of sync and can't talk to each
> other.
> 

Sounds good, I share this expectation, just wanted to check with you.

> > 
> > > > 
> > > > > These flags are there to indicate how to set rproc::sync_with_rproc after
> > > > > different events, that is when the remoteproc core boots, when the remoteproc
> > > > > has been stopped or when it has crashed.
> > > > > 
> > > > 
> > > > Right, that was clear from your patches. Sorry that my reply didn't
> > > > convey the information that I had understood this.
> > > > 
> > > > > > 
> > > > > > > +};
> > > > > > > +
> > > > > > >  /**
> > > > > > >   * struct rproc_ops - platform-specific device handlers
> > > > > > >   * @start:	power on the device and boot it
> > > > > > > @@ -459,6 +476,9 @@ struct rproc_dump_segment {
> > > > > > >   * @firmware: name of firmware file to be loaded
> > > > > > >   * @priv: private data which belongs to the platform-specific rproc module
> > > > > > >   * @ops: platform-specific start/stop rproc handlers
> > > > > > > + * @sync_ops: platform-specific start/stop rproc handlers when
> > > > > > > + *	      synchronising with a remote processor.
> > > > > > > + * @sync_flags: Determine the rproc_ops to choose in specific states.
> > > > > > >   * @dev: virtual device for refcounting and common remoteproc behavior
> > > > > > >   * @power: refcount of users who need this rproc powered up
> > > > > > >   * @state: state of the device
> > > > > > > @@ -482,6 +502,7 @@ struct rproc_dump_segment {
> > > > > > >   * @table_sz: size of @cached_table
> > > > > > >   * @has_iommu: flag to indicate if remote processor is behind an MMU
> > > > > > >   * @auto_boot: flag to indicate if remote processor should be auto-started
> > > > > > > + * @sync_with_rproc: true if currently synchronising with the rproc
> > > > > > >   * @dump_segments: list of segments in the firmware
> > > > > > >   * @nb_vdev: number of vdev currently handled by rproc
> > > > > > >   */
> > > > > > > @@ -492,6 +513,8 @@ struct rproc {
> > > > > > >  	const char *firmware;
> > > > > > >  	void *priv;
> > > > > > >  	struct rproc_ops *ops;
> > > > > > > +	struct rproc_ops *sync_ops;
> > > > > > 
> > > > > > Do we really need two rproc_ops, given that both are coming from the
> > > > > > platform driver and the sync_flags will define which one to look at?
> > > > > > 
> > > > > > Can't the platform driver just provide an ops table that works with the
> > > > > > flags it passes?
> > > > > 
> > > > > That is the approach Loic took in a previous patchset [1] and that was rejected.
> > > > > It also lead to all of the platform drivers testing rproc->flag before carring
> > > > > different actions, something you indicated could be done in the core.  This
> > > > > patch does exactly that, i.e move the testing of rproc->flag to the core and
> > > > > calls the right function based on that.
> > > > > 
> > > > 
> > > > I think I see what you mean, as we use "start" for both syncing and
> > > > starting the core, a { on_init = true, after_stop = false } setup either
> > > > needs two tables or force conditionals on the platform driver.
> > > > 
> > > > > The end result is the same and I'm happy with one or the other, I will need to
> > > > > know which one.
> > > > > 
> > > > 
> > > > How about adding a new ops named "attach" to rproc_ops, which the
> > > > platform driver can specify if it supports attaching an already running
> > > > processor?
> > > 
> > > Using "attach_ops" works for me.  But would "autonomous_ops", to correlate with
> > > rproc::autonomous, add clarity?  Either way work equally well for me. 
> > > 
> > 
> > What I meant was that we add a function "attach" to the existing
> > rproc_ops. In the case of OFFLINE->RUNNING we continue to call
> > rproc->ops->start() and DETACHED->RUNNING we call this
> > rproc->ops->attach().
> 
> If I read the above properly we'd end up with:
> 
> struct rproc_ops {
> 	int (*start)(struct rproc *rproc);
> 	int (*stop)(struct rproc *rproc);
> 	int (*attach)(struct rproc *rproc);
> 	int (*detach)(struct rproc *rproc);
>         ...
>         ...
> };

Yes, that's what I meant.

> 
> But wed'd have to deal with other operations that are common to both scenarios
> such as parse_fw() and find_loaded_rsc_table().  
> 

I would prefer that we don't parse_fw(NULL), perhaps we can turn that
upside down and have the platform_driver just provide the information to
the core as it learns about it during probe?

> So far lot of improvement have already been suggested on this revision.  I
> suggest to spin off a new patchset that only handles the DETACHED->RUNNING
> scenario and split common functions such as rproc_fw_boot().  From there we can
> see if other refinements (such as what you suggest above) are mandated.
> 

As far as I can see, if we take the approach of introducing the DETACHED
state we can add the various transitions piecemeal. So I'm definitely in
favour of starting off with DETACHED->RUNNING, then figure out
"autonomous recovery" and RUNNING->DETACHED in two subsequent series.

> One last thing...  Upon reflecting on all this I think using "attach" is better
> than "autonomous", the latter is heavy to drag around.
> 

For the action of going from DETACHED->RUNNING I too find "attach" to
better represent what's going on. The part where I think we need
something more is to communicate if it's Linux that's in charge or not
for taking the remote processor through RUNNING->CRASHED->RUNNING. For
that the word "autonomous" makes sense to me, but let's bring that up
again after landing this first piece(s).

Regards,
Bjorn



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux