Re: [PATCH v3 4/8] arm64: dts: qcom: qcs404: Add IMEM and PIL info region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 13 Feb 18:37 PST 2020, Stephen Boyd wrote:

> Quoting Bjorn Andersson (2020-02-10 16:50:55)
> > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > index 4ee1e3d5f123..f539293b875c 100644
> > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> > @@ -997,6 +997,19 @@ blsp2_spi0: spi@7af5000 {
> >                         status = "disabled";
> >                 };
> >  
> > +               imem@8600000 {
> > +                       compatible = "syscon", "simple-mfd";
> > +                       reg = <0x08600000 0x1000>;
> > +
> > +                       #address-cells = <1>;
> > +                       #size-cells = <1>;
> > +
> > +                       pil-reloc@94c {
> > +                               compatible ="qcom,pil-reloc-info";
> > +                               reg = <0x94c 200>;
> 
> Is it 200 in decimal? It looks weird that this is basically the only
> thing that isn't in hexadecimal.
> 

Yes it is and the size was documented as such... But you're probably not
the last one who will spend cycles wondering if I forgot the 0x.

Regards,
Bjorn

> > +                       };
> > +               };
> > +



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux