Re: [PATCH 05/17] remoteproc/omap: Add support to parse internal memories from DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 28 Oct 05:42 PDT 2019, Tero Kristo wrote:

> From: Suman Anna <s-anna@xxxxxx>
> 
> The OMAP remoteproc driver has been enhanced to parse and store
> the kernel mappings for different internal RAM memories that may
> be present within each remote processor IP subsystem. Different
> devices have varying memories present on current SoCs. The current
> support handles the L2RAM for all IPU devices on OMAP4+ SoCs. The
> DSPs on OMAP4/OMAP5 only have Unicaches and do not have any L1 or
> L2 RAM memories.
> 
> IPUs are expected to have the L2RAM at a fixed device address of
> 0x20000000, based on the current limitations on Attribute MMU
> configurations.
> 
> NOTE:
> The current logic doesn't handle the parsing of memories for DRA7
> remoteproc devices, and will be added alongside the DRA7 support.
> 
> Signed-off-by: Suman Anna <s-anna@xxxxxx>
> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
> ---
>  drivers/remoteproc/omap_remoteproc.c | 69 ++++++++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
> 
> diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
> index a10377547533..bbd6ff360e10 100644
> --- a/drivers/remoteproc/omap_remoteproc.c
> +++ b/drivers/remoteproc/omap_remoteproc.c
> @@ -29,6 +29,8 @@
>  #include "omap_remoteproc.h"
>  #include "remoteproc_internal.h"
>  
> +#define OMAP_RPROC_IPU_L2RAM_DEV_ADDR		(0x20000000)
> +
>  /**
>   * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs
>   * @syscon: regmap handle for the system control configuration module
> @@ -39,11 +41,27 @@ struct omap_rproc_boot_data {
>  	unsigned int boot_reg;
>  };
>  
> +/*
> + * struct omap_rproc_mem - internal memory structure
> + * @cpu_addr: MPU virtual address of the memory region
> + * @bus_addr: bus address used to access the memory region
> + * @dev_addr: device address of the memory region from DSP view
> + * @size: size of the memory region
> + */
> +struct omap_rproc_mem {
> +	void __iomem *cpu_addr;
> +	phys_addr_t bus_addr;
> +	u32 dev_addr;
> +	size_t size;
> +};
> +
>  /**
>   * struct omap_rproc - omap remote processor state
>   * @mbox: mailbox channel handle
>   * @client: mailbox client to request the mailbox channel
>   * @boot_data: boot data structure for setting processor boot address
> + * @mem: internal memory regions data
> + * @num_mems: number of internal memory regions
>   * @rproc: rproc handle
>   * @reset: reset handle
>   */
> @@ -51,6 +69,8 @@ struct omap_rproc {
>  	struct mbox_chan *mbox;
>  	struct mbox_client client;
>  	struct omap_rproc_boot_data *boot_data;
> +	struct omap_rproc_mem *mem;
> +	int num_mems;
>  	struct rproc *rproc;
>  	struct reset_control *reset;
>  };
> @@ -307,6 +327,51 @@ static int omap_rproc_get_boot_data(struct platform_device *pdev,
>  	return 0;
>  }
>  
> +static int omap_rproc_of_get_internal_memories(struct platform_device *pdev,
> +					       struct rproc *rproc)
> +{
> +	static const char * const mem_names[] = {"l2ram"};
> +	struct device_node *np = pdev->dev.of_node;
> +	struct omap_rproc *oproc = rproc->priv;
> +	struct device *dev = &pdev->dev;
> +	struct resource *res;
> +	int num_mems;
> +	int i;
> +
> +	/* OMAP4 and OMAP5 DSPs do not have support for flat SRAM */
> +	if (of_device_is_compatible(np, "ti,omap4-dsp") ||
> +	    of_device_is_compatible(np, "ti,omap5-dsp"))
> +		return 0;
> +
> +	num_mems = ARRAY_SIZE(mem_names);
> +	oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem),
> +				  GFP_KERNEL);
> +	if (!oproc->mem)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < num_mems; i++) {
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						   mem_names[i]);
> +		oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(oproc->mem[i].cpu_addr)) {
> +			dev_err(dev, "failed to parse and map %s memory\n",
> +				mem_names[i]);
> +			return PTR_ERR(oproc->mem[i].cpu_addr);
> +		}
> +		oproc->mem[i].bus_addr = res->start;
> +		oproc->mem[i].dev_addr = OMAP_RPROC_IPU_L2RAM_DEV_ADDR;

Presumably this means that mem_names[] will only ever be {"l2ram"} ?

This would imply that you can either remove the loop or you should
generalize this for dev_addr as well.


Apart from that, this looks good.

Regards,
Bjorn

> +		oproc->mem[i].size = resource_size(res);
> +
> +		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %p da 0x%x\n",
> +			mem_names[i], &oproc->mem[i].bus_addr,
> +			oproc->mem[i].size, oproc->mem[i].cpu_addr,
> +			oproc->mem[i].dev_addr);
> +	}
> +	oproc->num_mems = num_mems;
> +
> +	return 0;
> +}
> +
>  static int omap_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device_node *np = pdev->dev.of_node;
> @@ -346,6 +411,10 @@ static int omap_rproc_probe(struct platform_device *pdev)
>  	/* All existing OMAP IPU and DSP processors have an MMU */
>  	rproc->has_iommu = true;
>  
> +	ret = omap_rproc_of_get_internal_memories(pdev, rproc);
> +	if (ret)
> +		goto free_rproc;
> +
>  	ret = omap_rproc_get_boot_data(pdev, rproc);
>  	if (ret)
>  		goto free_rproc;
> -- 
> 2.17.1
> 
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux