[PATCH_v3 0/2] Add Q6SSTOP clock controller for QCS404

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for the Q6SSTOP clock control used on qcs404
based devices. This would allow wcss remoteproc driver to
control the required WCSS Q6SSTOP clock/reset controls to
bring the subsystem out of reset and shutdown the WCSS Q6DSP.

Changes in v3:
    - Fixed dt binding errors.

Changes in v2:
    - changed binding doc to yaml format.
    - Fixed alignment in q6sstop cc driver.

Govind Singh (2):
  dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings
  clk: qcom: Add Q6SSTOP clock controller for QCS404

 .../bindings/clock/qcom,q6sstopcc.yaml        |  47 ++++
 drivers/clk/qcom/Kconfig                      |   8 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/q6sstop-qcs404.c             | 223 ++++++++++++++++++
 .../dt-bindings/clock/qcom,q6sstopcc-qcs404.h |  18 ++
 5 files changed, 297 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
 create mode 100644 drivers/clk/qcom/q6sstop-qcs404.c
 create mode 100644 include/dt-bindings/clock/qcom,q6sstopcc-qcs404.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux