Quoting Govind Singh (2019-07-26 02:23:27)
> Add devicetree binding for the Q6SSTOP clock controller found in QCS404.
>
> Signed-off-by: Govind Singh <govinds@xxxxxxxxxxxxxx>
If this patch goes again, please convert to YAML.
> ---
> .../bindings/clock/qcom,q6sstopcc.txt | 26 +++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100755 Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
> new file mode 100755
> index 000000000000..157bb52f9dc4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
> @@ -0,0 +1,26 @@
> +Qualcomm Q6SSTOP Clock Controller Binding
> +-----------------------------------------------
> +
> +Required properties :
> +- compatible : shall contain "qcom,qcs404-q6sstopcc"
> +- #clock-cells : from common clock binding, shall contain 1
> +- reg : shall contain base register address and size,
> + in the order
> + Index 0 maps to Q6SSTOP clocks register region
> + Index 1 maps to Q6SSTOP_TCSR register region
> +
> +Optional properties :
> +- reg-names : register names of WCSS domain
> + "q6sstop_cc", "q6sstop_tcsr".
> +
> +Example:
> +The below node has to be defined in the cases where the WCSS peripheral loader
> +would bring the subsystem out of reset.
> +
> + q6sstopcc: clock-controller@7500000 {
> + compatible = "qcom,qcs404-q6sstopcc";
> + reg = <0x7500000 0x4e000>, <0x7550000 0x10000>;
> + reg-names = "q6sstop_cc", "q6sstop_tcsr";
> + clocks = <&gcc GCC_WCSS_Q6_AHB_CLK>;
This isn't described in the binding. Are there clocks that go here?
Please add them to the binding.
