Re: [PATCH 2/6] clk: qcom: Add WCSS gcc clock control for QCS404

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks Taniya for the review.

On 2018-10-09 23:25, Taniya Das wrote:
On 10/9/2018 6:35 PM, Govind Singh wrote:
Add support for the WCSS QDSP gcc clock control used on qcs404 based devices. This would allow wcss remoteproc driver to control the required gcc clocks to
bring the subsystem out of reset.

Signed-off-by: Govind Singh <govinds@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/gcc-qcs404.c | 39 ++++++++++++++++++++++++++++++++++++++-
  1 file changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c
index 6d1387e..bcbfe19 100644
--- a/drivers/clk/qcom/gcc-qcs404.c
+++ b/drivers/clk/qcom/gcc-qcs404.c
@@ -2505,6 +2505,34 @@ enum {
  	},
  };
  +static struct clk_branch gcc_ahbs_cbcr_clk = {

There is no such clock, the clock names should match exactly as they
are represented in hardware plans.


I will change the names in next patch-set. Below are the names in hw plans.
gcc_wdsp_q6ss_axim_clk
gcc_wdsp_q6ss_ahbs_clk

+	.halt_reg = 0x1e004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1e004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ahb_cbcr_clk",
+			.ops = &clk_branch2_ops,
+			.flags = CLK_IGNORE_UNUSED,

Do we need this flag?

This is not required in gcc controls, i will clean up this in next patch-set.

+		},
+	},
+};
+
+static struct clk_branch gcc_axim_cbcr_clk = {
+	.halt_reg = 0x1e008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1e008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_axim_cbcr_clk",
+			.ops = &clk_branch2_ops,
+			.flags = CLK_IGNORE_UNUSED,
+		},
+	},
+};
+
  static struct clk_regmap *gcc_qcs404_clocks[] = {
  	[APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr,
  	[BLSP1_QUP0_I2C_APPS_CLK_SRC] = &blsp1_qup0_i2c_apps_clk_src.clkr,
@@ -2642,6 +2670,9 @@ enum {
  	[GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
  	[GCC_DCC_CLK] = &gcc_dcc_clk.clkr,
  	[GCC_DCC_XO_CLK] = &gcc_dcc_xo_clk.clkr,
+	[GCC_WCSS_Q6_AHB_CBCR_CLK] = NULL,
+	[GCC_WCSS_Q6_AXIM_CBCR_CLK] =  NULL,
+
  };
    static const struct qcom_reset_map gcc_qcs404_resets[] = {
@@ -2659,6 +2690,7 @@ enum {
  	[GCC_PCIE_0_LINK_DOWN_BCR] = {0x3E038},
  	[GCC_PCIEPHY_0_PHY_BCR] = {0x3E03C},
  	[GCC_EMAC_BCR] = {0x4E000},
+	[GCC_WDSP_RESTART] = {0x19000},

s/RESTART/BCR


This reset control is listed as WDSP_RESTART in register spec.

  };
    static const struct regmap_config gcc_qcs404_regmap_config = {
@@ -2669,7 +2701,7 @@ enum {
  	.fast_io	= true,
  };
  -static const struct qcom_cc_desc gcc_qcs404_desc = {
+static struct qcom_cc_desc gcc_qcs404_desc = {
  	.config = &gcc_qcs404_regmap_config,
  	.clks = gcc_qcs404_clocks,
  	.num_clks = ARRAY_SIZE(gcc_qcs404_clocks),
@@ -2702,6 +2734,11 @@ static int gcc_qcs404_probe(struct platform_device *pdev)
  	clk_prepare_enable(apss_ahb_clk_src.clkr.hw.clk);
  	clk_prepare_enable(gpll0_ao_out_main.clkr.hw.clk);
+ if (of_property_read_bool(pdev->dev.of_node, "qcom,wcss-protected")) { + gcc_qcs404_clocks[GCC_WCSS_Q6_AHB_CBCR_CLK] = &gcc_ahbs_cbcr_clk.clkr; + gcc_qcs404_clocks[GCC_WCSS_Q6_AXIM_CBCR_CLK] = &gcc_axim_cbcr_clk.clkr;
+	}
+
  	return qcom_cc_really_probe(pdev, &gcc_qcs404_desc, regmap);
  }


BR,
Govind



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux