From: "Andrew F. Davis" <afd@xxxxxx>
The DSPs are expected to be in reset when the driver probes a device.
If the DSPs are out of reset in probe, the system may crash when the
firmware is being loaded. So, add a check to make sure the DSP resets
are asserted, and if not, throw a eye-catchy warning and assert the
resets specifically.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
[s-anna@xxxxxx: replace warning with a WARN]
Signed-off-by: Suman Anna <s-anna@xxxxxx>
---
v2: No code changes
drivers/remoteproc/keystone_remoteproc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
index 6e09ef76f7c7..5f776bfd674a 100644
--- a/drivers/remoteproc/keystone_remoteproc.c
+++ b/drivers/remoteproc/keystone_remoteproc.c
@@ -456,6 +456,16 @@ static int keystone_rproc_probe(struct platform_device *pdev)
if (of_reserved_mem_device_init(dev))
dev_warn(dev, "device does not have specific CMA pool\n");
+ /* ensure the DSP is in reset before loading firmware */
+ ret = reset_control_status(ksproc->reset);
+ if (ret < 0) {
+ dev_err(dev, "failed to get reset status, status = %d\n", ret);
+ goto release_mem;
+ } else if (ret == 0) {
+ WARN(1, "device is not in reset\n");
+ keystone_rproc_dsp_reset(ksproc);
+ }
+
ret = rproc_add(rproc);
if (ret) {
dev_err(dev, "failed to add register device with remoteproc core, status = %d\n",
--
2.12.0
--
To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
