On Wed, May 31, 2017 at 03:05:59PM -0500, Suman Anna wrote: > Hi Rob, > > On 05/31/2017 02:12 PM, Rob Herring wrote: > > On Fri, May 26, 2017 at 11:53:15AM -0500, Suman Anna wrote: > >> Add the device tree bindings document for the Texas Instrument's > >> Keystone 2 DSP remoteproc devices. > >> > >> Signed-off-by: Suman Anna <s-anna@xxxxxx> > >> Signed-off-by: Sam Nelson <sam.nelson@xxxxxx> > >> --- > >> .../bindings/remoteproc/ti,keystone-rproc.txt | 132 +++++++++++++++++++++ > >> 1 file changed, 132 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt > >> > >> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt > >> new file mode 100644 > >> index 000000000000..f1ba88edd00d > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt > >> @@ -0,0 +1,132 @@ > >> +TI Keystone DSP devices > >> +======================= > >> + > >> +Binding status: Unstable - Subject to changes for using multiple memory regions > > > > I don't really see what would be unstable here. memory-region is easily > > extended to multiple entries. > > OK will drop this line. > > > > >> + > >> +The TI Keystone 2 family of SoCs usually have one or more (upto 8) TI DSP Core > >> +sub-systems that are used to offload some of the processor-intensive tasks or > >> +algorithms, for achieving various system level goals. > >> + > >> +These processor sub-systems usually contain additional sub-modules like L1 > >> +and/or L2 caches/SRAMs, an Interrupt Controller, an external memory controller, > >> +a dedicated local power/sleep controller etc. The DSP processor core in > >> +Keystone 2 SoCs is usually a TMS320C66x CorePac processor. > >> + > >> +DSP Device Node: > >> +================ > >> +Each DSP Core sub-system is represented as a single DT node. Each node has a > >> +number of required or optional properties that enable the OS running on the > >> +host processor (ARM CorePac) to perform the device management of the remote > >> +processor and to communicate with the remote processor. > >> + > >> +Required properties: > >> +-------------------- > >> +The following are the mandatory properties: > >> + > >> +- compatible: Should be one of the following, > >> + "ti,k2hk-dsp" for DSPs on Keystone 2 66AK2H/K SoCs > >> + "ti,k2l-dsp" for DSPs on Keystone 2 66AK2L SoCs > >> + "ti,k2e-dsp" for DSPs on Keystone 2 66AK2E SoCs > >> + > >> +- reg: Should contain an entry for each value in 'reg-names'. > >> + Each entry should have the memory region's start address > >> + and the size of the region, the representation matching > >> + the parent node's '#address-cells' and '#size-cells' values. > >> + > >> +- reg-names: Should contain strings with the following names, each > >> + representing a specific internal memory region, and > >> + should be defined in this order, > >> + "l2sram", "l1pram", "l1dram" > >> + > >> +- label: Should contain a string identifying the DSP instance > >> + within the SoC. Should be the string "dsp" followed by > >> + the instance number. Eg: "dsp0", "dsp1",..."dsp7" etc > > > > Why does a user need to know or care? > > This is used to distinguish the exact DSP instance from others since the > DT node name is a generic "dsp". One of the uses is to be able to > construct a firmware name within the driver using this label. firmware-name doesn't work for you? It was obvious that you are using this to number instances. Why do you care which instance is which? For example, I want dsp0 because it has X or runs at XXMHz, etc. If each instance is different (i.e. not a pool of DSPs), then you should describe the difference some way. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
