Re: [PATCH v2 1/1] remoteproc: Add support for xo clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/25/2016 01:57 PM, Sarangdhar Joshi wrote:
Add xo clock support required to boot up Qualcomm ADSP processor.
The ADSP remoteproc driver keeps xo clock enabled until the
driver receives "handover" irq, in order to allow ADSP processor
to vote for xo clock with rpm.

Signed-off-by: Sarangdhar Joshi <spjoshi@xxxxxxxxxxxxxx>
---

Changes since v1:
 - Avoid logging error for probe deferral case (Stephen)
 - Update commit text (Stephen)

 drivers/remoteproc/qcom_adsp_pil.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index 9141633..5bb25d1 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -15,6 +15,7 @@
  * GNU General Public License for more details.
  */

+#include <linux/clk.h>
 #include <linux/firmware.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -48,6 +49,8 @@ struct qcom_adsp {
 	struct qcom_smem_state *state;
 	unsigned stop_bit;

+	struct clk *xo;
+
 	struct regulator *cx_supply;

 	struct completion start_done;
@@ -102,10 +105,14 @@ static int adsp_start(struct rproc *rproc)
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int ret;

-	ret = regulator_enable(adsp->cx_supply);
+	ret = clk_prepare_enable(adsp->xo);
 	if (ret)
 		return ret;

+	ret = regulator_enable(adsp->cx_supply);
+	if (ret)
+		goto disable_clocks;
+
 	ret = qcom_scm_pas_auth_and_reset(ADSP_PAS_ID);
 	if (ret) {
 		dev_err(adsp->dev,
@@ -126,6 +133,8 @@ static int adsp_start(struct rproc *rproc)

 disable_regulators:
 	regulator_disable(adsp->cx_supply);
+disable_clocks:
+	clk_disable_unprepare(adsp->xo);

 	return ret;
 }
@@ -223,6 +232,21 @@ static irqreturn_t adsp_stop_ack_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }

+static int adsp_init_clock(struct qcom_adsp *adsp)
+{
+	int ret;
+
+	adsp->xo = devm_clk_get(adsp->dev, "xo");
+	if (IS_ERR(adsp->xo)) {
+		ret = PTR_ERR(adsp->xo);
+		if (ret != -EPROBE_DEFER)
+			dev_err(adsp->dev, "failed to get xo clock");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int adsp_init_regulator(struct qcom_adsp *adsp)
 {
 	adsp->cx_supply = devm_regulator_get(adsp->dev, "cx");
@@ -320,6 +344,10 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;

+	ret = adsp_init_clock(adsp);
+	if (ret)
+		goto free_rproc;
+
 	ret = adsp_init_regulator(adsp);
 	if (ret)
 		goto free_rproc;



--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Photo Sharing]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux