From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- Changes since v1: - Added dts patches .../boot/dts/qcom-msm8974-sony-xperia-honami.dts | 32 +++++++++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 36 +++++++++++++++++++++- 2 files changed, 67 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index a0398b69f4f2..74faa291d213 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -311,6 +311,13 @@ pinctrl-0 = <&blsp1_uart2_pin_a>; }; + wcnss-rproc@fb21b000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + }; + pinctrl@fd510000 { blsp1_uart2_pin_a: blsp1-uart2-pin-active { rx { @@ -366,6 +373,31 @@ }; }; + wcnss_pin_a: wcnss-pin-active { + wlan { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + bt { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + + drive-strength = <2>; + bias-pull-down; + }; + + fm { + pins = "gpio41", "gpio42"; + function = "fm"; + + drive-strength = <2>; + bias-pull-down; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ef5330578431..5c0d1a46baeb 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -2,6 +2,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include "skeleton.dtsi" / { @@ -24,7 +25,7 @@ no-map; }; - reserved@0d200000 { + wcnss_region: wcnss@0d200000 { reg = <0x0d200000 0xa00000>; no-map; }; @@ -430,6 +431,39 @@ clock-names = "core"; }; + wcnss-rproc@fb21b000 { + compatible = "qcom,pronto-v2-pil"; + reg = <0xfb21b000 0x3000>; + + memory-region = <&wcnss_region>; + + interrupts-extended = <&intc 0 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + vddpx-supply = <&pm8941_s3>; + + qcom,state = <&wcnss_smp2p_out 0>; + qcom,state-names = "stop"; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3680"; + + clocks = <&rpmcc RPM_CXO_A2>; + clock-names = "xo"; + + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + }; + msmgpio: pinctrl@fd510000 { compatible = "qcom,msm8974-pinctrl"; reg = <0xfd510000 0x4000>; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html