From: Lang Cheng <chenglang@xxxxxxxxxx>
Simplify __hns_roce_cmq_send() then remove the redundant variables.
Signed-off-by: Lang Cheng <chenglang@xxxxxxxxxx>
Signed-off-by: Weihang Li <liweihang@xxxxxxxxxx>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 39 ++++++++++++------------------
1 file changed, 16 insertions(+), 23 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 23a69cf..69b210a 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -1207,25 +1207,20 @@ static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
{
struct hns_roce_v2_priv *priv = hr_dev->priv;
struct hns_roce_v2_cmq_ring *csq = &priv->cmq.csq;
- struct hns_roce_cmq_desc *desc_to_use;
u32 timeout = 0;
- int handle = 0;
u16 desc_ret;
u32 tail;
int ret;
+ int i;
spin_lock_bh(&csq->lock);
tail = csq->head;
- while (handle < num) {
- desc_to_use = &csq->desc[csq->head];
- *desc_to_use = desc[handle];
- dev_dbg(hr_dev->dev, "set cmq desc:\n");
- csq->head++;
+ for (i = 0; i < num; i++) {
+ csq->desc[csq->head++] = desc[i];
if (csq->head == csq->desc_num)
csq->head = 0;
- handle++;
}
/* Write to hardware */
@@ -1235,25 +1230,23 @@ static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
if (hns_roce_cmq_csq_done(hr_dev))
break;
udelay(1);
- timeout++;
- } while (timeout < priv->cmq.tx_timeout);
+ } while (++timeout < priv->cmq.tx_timeout);
if (hns_roce_cmq_csq_done(hr_dev)) {
- handle = 0;
- ret = 0;
- while (handle < num) {
- /* get the result of hardware write back */
- desc_to_use = &csq->desc[tail];
- desc[handle] = *desc_to_use;
- dev_dbg(hr_dev->dev, "Get cmq desc:\n");
- desc_ret = le16_to_cpu(desc[handle].retval);
- if (unlikely(desc_ret != CMD_EXEC_SUCCESS))
- ret = -EIO;
-
- tail++;
- handle++;
+ for (ret = 0, i = 0; i < num; i++) {
+ /* check the result of hardware write back */
+ desc[i] = csq->desc[tail++];
if (tail == csq->desc_num)
tail = 0;
+
+ desc_ret = le16_to_cpu(desc[i].retval);
+ if (likely(desc_ret == CMD_EXEC_SUCCESS))
+ continue;
+
+ dev_err_ratelimited(hr_dev->dev,
+ "Cmdq IO error, opcode = %x, return = %x\n",
+ desc->opcode, desc_ret);
+ ret = -EIO;
}
} else {
/* FW/HW reset or incorrect number of desc */
--
2.8.1
