From: Lang Cheng <chenglang@xxxxxxxxxx>
HIP08/09 only supports CMDQ in non-interrupt mode, and the firmware always
ignores the flag to indicate the mode. Therefore, remove the dead code.
Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Lang Cheng <chenglang@xxxxxxxxxx>
Signed-off-by: Weihang Li <liweihang@xxxxxxxxxx>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 24 ++++++++----------------
drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 2 --
2 files changed, 8 insertions(+), 18 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 7a5a41d..260c17c 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -1197,8 +1197,7 @@ static void hns_roce_cmq_setup_basic_desc(struct hns_roce_cmq_desc *desc,
{
memset((void *)desc, 0, sizeof(struct hns_roce_cmq_desc));
desc->opcode = cpu_to_le16(opcode);
- desc->flag =
- cpu_to_le16(HNS_ROCE_CMD_FLAG_NO_INTR | HNS_ROCE_CMD_FLAG_IN);
+ desc->flag = cpu_to_le16(HNS_ROCE_CMD_FLAG_IN);
if (is_read)
desc->flag |= cpu_to_le16(HNS_ROCE_CMD_FLAG_WR);
else
@@ -1275,18 +1274,12 @@ static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
/* Write to hardware */
roce_write(hr_dev, ROCEE_TX_CMQ_TAIL_REG, csq->next_to_use);
- /*
- * If the command is sync, wait for the firmware to write back,
- * if multi descriptors to be sent, use the first one to check
- */
- if (le16_to_cpu(desc->flag) & HNS_ROCE_CMD_FLAG_NO_INTR) {
- do {
- if (hns_roce_cmq_csq_done(hr_dev))
- break;
- udelay(1);
- timeout++;
- } while (timeout < priv->cmq.tx_timeout);
- }
+ do {
+ if (hns_roce_cmq_csq_done(hr_dev))
+ break;
+ udelay(1);
+ timeout++;
+ } while (timeout < priv->cmq.tx_timeout);
if (hns_roce_cmq_csq_done(hr_dev)) {
handle = 0;
@@ -1626,8 +1619,7 @@ static int hns_roce_set_vf_switch_param(struct hns_roce_dev *hr_dev, int vf_id)
if (ret)
return ret;
- desc.flag =
- cpu_to_le16(HNS_ROCE_CMD_FLAG_NO_INTR | HNS_ROCE_CMD_FLAG_IN);
+ desc.flag = cpu_to_le16(HNS_ROCE_CMD_FLAG_IN);
desc.flag &= cpu_to_le16(~HNS_ROCE_CMD_FLAG_WR);
roce_set_bit(swt->cfg, VF_SWITCH_DATA_CFG_ALW_LPBK_S, 1);
roce_set_bit(swt->cfg, VF_SWITCH_DATA_CFG_ALW_LCL_LPBK_S, 0);
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
index 9f97e32..986a287 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
@@ -128,14 +128,12 @@
#define HNS_ROCE_CMD_FLAG_OUT_VALID_SHIFT 1
#define HNS_ROCE_CMD_FLAG_NEXT_SHIFT 2
#define HNS_ROCE_CMD_FLAG_WR_OR_RD_SHIFT 3
-#define HNS_ROCE_CMD_FLAG_NO_INTR_SHIFT 4
#define HNS_ROCE_CMD_FLAG_ERR_INTR_SHIFT 5
#define HNS_ROCE_CMD_FLAG_IN BIT(HNS_ROCE_CMD_FLAG_IN_VALID_SHIFT)
#define HNS_ROCE_CMD_FLAG_OUT BIT(HNS_ROCE_CMD_FLAG_OUT_VALID_SHIFT)
#define HNS_ROCE_CMD_FLAG_NEXT BIT(HNS_ROCE_CMD_FLAG_NEXT_SHIFT)
#define HNS_ROCE_CMD_FLAG_WR BIT(HNS_ROCE_CMD_FLAG_WR_OR_RD_SHIFT)
-#define HNS_ROCE_CMD_FLAG_NO_INTR BIT(HNS_ROCE_CMD_FLAG_NO_INTR_SHIFT)
#define HNS_ROCE_CMD_FLAG_ERR_INTR BIT(HNS_ROCE_CMD_FLAG_ERR_INTR_SHIFT)
#define HNS_ROCE_CMQ_DESC_NUM_S 3
--
2.8.1
