Re: [PATCH mlx5-next v1 2/5] PCI: Add SR-IOV sysfs entry to read number of MSI-X vectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 12, 2021 at 01:34:50PM -0800, Alexander Duyck wrote:
> On Mon, Jan 11, 2021 at 10:56 PM Leon Romanovsky <leon@xxxxxxxxxx> wrote:
> >
> > On Mon, Jan 11, 2021 at 11:30:39AM -0800, Alexander Duyck wrote:
> > > On Sun, Jan 10, 2021 at 7:10 AM Leon Romanovsky <leon@xxxxxxxxxx> wrote:
> > > >
> > > > From: Leon Romanovsky <leonro@xxxxxxxxxx>
> > > >
> > > > Some SR-IOV capable devices provide an ability to configure specific
> > > > number of MSI-X vectors on their VF prior driver is probed on that VF.
> > > >
> > > > In order to make management easy, provide new read-only sysfs file that
> > > > returns a total number of possible to configure MSI-X vectors.
> > > >
> > > > cat /sys/bus/pci/devices/.../sriov_vf_total_msix
> > > >   = 0 - feature is not supported
> > > >   > 0 - total number of MSI-X vectors to consume by the VFs
> > > >
> > > > Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxx>
> > > > ---
> > > >  Documentation/ABI/testing/sysfs-bus-pci | 14 +++++++++++
> > > >  drivers/pci/iov.c                       | 31 +++++++++++++++++++++++++
> > > >  drivers/pci/pci.h                       |  3 +++
> > > >  include/linux/pci.h                     |  2 ++
> > > >  4 files changed, 50 insertions(+)
> > > >
> > > > diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
> > > > index 05e26e5da54e..64e9b700acc9 100644
> > > > --- a/Documentation/ABI/testing/sysfs-bus-pci
> > > > +++ b/Documentation/ABI/testing/sysfs-bus-pci
> > > > @@ -395,3 +395,17 @@ Description:
> > > >                 The file is writable if the PF is bound to a driver that
> > > >                 supports the ->sriov_set_msix_vec_count() callback and there
> > > >                 is no driver bound to the VF.
> > > > +
> > > > +What:          /sys/bus/pci/devices/.../sriov_vf_total_msix
> > >
> > > In this case I would drop the "vf" and just go with sriov_total_msix
> > > since now you are referring to a global value instead of a per VF
> > > value.
> >
> > This field indicates the amount of MSI-X available for VFs, it doesn't
> > include PFs. The missing "_vf_" will mislead users who will believe that
> > it is all MSI-X vectors available for this device. They will need to take
> > into consideration amount of PF MSI-X in order to calculate the VF distribution.
> >
> > So I would leave "_vf_" here.
>
> The problem is you aren't indicating how many are available for an
> individual VF though, you are indicating how many are available for
> use by SR-IOV to give to the VFs. The fact that you are dealing with a
> pool makes things confusing in my opinion. For example sriov_vf_device
> describes the device ID that will be given to each VF.

sriov_vf_device is different and is implemented accordingly to the PCI
spec, 9.3.3.11 VF Device ID (Offset 1Ah)
"This field contains the Device ID that should be presented for every VF
to the SI."

It is one ID for all VFs.

>
> > >
> > > > +Date:          January 2021
> > > > +Contact:       Leon Romanovsky <leonro@xxxxxxxxxx>
> > > > +Description:
> > > > +               This file is associated with the SR-IOV PFs.
> > > > +               It returns a total number of possible to configure MSI-X
> > > > +               vectors on the enabled VFs.
> > > > +
> > > > +               The values returned are:
> > > > +                * > 0 - this will be total number possible to consume by VFs,
> > > > +                * = 0 - feature is not supported
> > > > +
> > > > +               If no SR-IOV VFs are enabled, this value will return 0.
> > > > diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> > > > index 42c0df4158d1..0a6ddf3230fd 100644
> > > > --- a/drivers/pci/iov.c
> > > > +++ b/drivers/pci/iov.c
> > > > @@ -394,12 +394,22 @@ static ssize_t sriov_drivers_autoprobe_store(struct device *dev,
> > > >         return count;
> > > >  }
> > > >
> > > > +static ssize_t sriov_vf_total_msix_show(struct device *dev,
> > > > +                                       struct device_attribute *attr,
> > > > +                                       char *buf)
> > > > +{
> > > > +       struct pci_dev *pdev = to_pci_dev(dev);
> > > > +
> > > > +       return sprintf(buf, "%d\n", pdev->sriov->vf_total_msix);
> > > > +}
> > > > +
> > >
> > > You display it as a signed value, but unsigned values are not
> > > supported, correct?
> >
> > Right, I made it similar to the vf_msix_set. I can change.
> >
> > >
> > > >  static DEVICE_ATTR_RO(sriov_totalvfs);
> > > >  static DEVICE_ATTR_RW(sriov_numvfs);
> > > >  static DEVICE_ATTR_RO(sriov_offset);
> > > >  static DEVICE_ATTR_RO(sriov_stride);
> > > >  static DEVICE_ATTR_RO(sriov_vf_device);
> > > >  static DEVICE_ATTR_RW(sriov_drivers_autoprobe);
> > > > +static DEVICE_ATTR_RO(sriov_vf_total_msix);
> > > >
> > > >  static struct attribute *sriov_dev_attrs[] = {
> > > >         &dev_attr_sriov_totalvfs.attr,
> > > > @@ -408,6 +418,7 @@ static struct attribute *sriov_dev_attrs[] = {
> > > >         &dev_attr_sriov_stride.attr,
> > > >         &dev_attr_sriov_vf_device.attr,
> > > >         &dev_attr_sriov_drivers_autoprobe.attr,
> > > > +       &dev_attr_sriov_vf_total_msix.attr,
> > > >         NULL,
> > > >  };
> > > >
> > > > @@ -658,6 +669,7 @@ static void sriov_disable(struct pci_dev *dev)
> > > >                 sysfs_remove_link(&dev->dev.kobj, "dep_link");
> > > >
> > > >         iov->num_VFs = 0;
> > > > +       iov->vf_total_msix = 0;
> > > >         pci_iov_set_numvfs(dev, 0);
> > > >  }
> > > >
> > > > @@ -1116,6 +1128,25 @@ int pci_sriov_get_totalvfs(struct pci_dev *dev)
> > > >  }
> > > >  EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs);
> > > >
> > > > +/**
> > > > + * pci_sriov_set_vf_total_msix - set total number of MSI-X vectors for the VFs
> > > > + * @dev: the PCI PF device
> > > > + * @numb: the total number of MSI-X vector to consume by the VFs
> > > > + *
> > > > + * Sets the number of MSI-X vectors that is possible to consume by the VFs.
> > > > + * This interface is complimentary part of the pci_set_msix_vec_count()
> > > > + * that will be used to configure the required number on the VF.
> > > > + */
> > > > +void pci_sriov_set_vf_total_msix(struct pci_dev *dev, int numb)
> > > > +{
> > > > +       if (!dev->is_physfn || !dev->driver ||
> > > > +           !dev->driver->sriov_set_msix_vec_count)
> > > > +               return;
> > > > +
> > > > +       dev->sriov->vf_total_msix = numb;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(pci_sriov_set_vf_total_msix);
> > > > +
> > >
> > > This seems broken. What validation is being done on the numb value?
> > > You pass it as int, and your documentation all refers to tests for >=
> > > 0, but isn't a signed input a possibility as well? Also "numb" doesn't
> > > make for a good abbreviation as it is already a word of its own. It
> > > might make more sense to use count or something like that rather than
> > > trying to abbreviate number.
> >
> > "Broken" is a nice word to describe misunderstanding.
>
> Would you prefer "lacking input validation".
>
> I see all this code in there checking for is_physfn and driver and
> sriov_set_msix_vec_count before allowing the setting of vf_total_msix.
> It just seems like a lot of validation is taking place on the wrong
> things if you are just going to be setting a value reporting the total
> number of MSI-X vectors in use for SR-IOV.

All those checks are in place to ensure that we are not overwriting the
default value, which is 0.

>
> In addition this value seems like a custom purpose being pushed into
> the PCIe code since there isn't anything that defaults the value. It
> seems like at a minimum there should be something that programs a
> default value for both of these new fields that are being added so
> that you pull the maximum number of VFs when SR-IOV is enabled, the
> maximum number of MSI-X vectors from a single VF, and then the default
> value for this should be the multiple of the two which can then be
> overridden later.

The default is 0, because most SR-IOV doesn't have proper support of
setting VF MSI-X.

Regarding the calculation, it is not correct for the mlx5. We have large
pool of MSI-X vectors, but setting small number of them. This allows us
to increase that number on specific VF without need to decrease on
others "to free" the vectors.

Thanks



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux